Blomberg WNF 8441 AE20 Installation Electrical connection, Fitting a different plug, 12 / EN

Page 12

Installation

A WARNING: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

3.7 Electrical connection

Connect the product to a grounded outlet protected by a 13 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

•Connection must comply with national regulations.

•Power cable plug must be within easy reach after installation.

•If the current value of the fuse or breaker in the house is less than 13 Amps, have a qualified electrician install a 13 Amp fuse.

•The voltage specified in the "Technical specifications" section must be equal to your mains voltage.

•Do not make connections via extension cables or multi-plugs.

B WARNING: Damaged power cables must be replaced by the Authorized Service Agents.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply.

We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position. Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

B WARNING: This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house. The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green.

2Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

12 / EN

Washing Machine /User’s Manual

 

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Washing Machine WNF 8441 AE20 Dear Customer Explanation of symbols Important information or useful hints about usageImportant instructions for safety Environment4 InstallationMaintenance and cleaning TroubleshootingImportant instructions for safety and environment General safetyUnplug the product when not in use Service life of your product is 10 yearsCompliance with Weee Directive Package informationDisposing of the waste product Power cable Your washing machineOverview Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Stand-by mode power W Off-mode power W Main model codeModels EN Spin speed rpm/ min., maxInstallation Appropriate installation locationRemoving packaging reinforcement Removing the transportation locksInstallation Connecting water supplyConnecting to the drain Adjusting the feet 11 / ENInstallation Electrical connection Fitting a different plug12 / EN 13 / EN Preparation Sorting the laundry14 / EN Preparation Preparing laundry for washing Initial useThings to be done for energy saving 15 / ENUsing detergent and softener Preparation Correct load capacityLoading the laundry Adjusting detergent amount PreparationUse different detergents for coloured and white laundry 17 / ENUsing starch Using bleachesDo not use softener and starch together in a washing cycle Do not use bleaching agent and detergent by mixing themPreparation Tips for efficient washing 19 / ENDisplay symbols Operating the productControl panel Operating the product Preparing the machine Programme selectionMain programmes Operating the product Additional programmes Temperature selection Operating the product Special programmesSpin speed selection 23 / ENOperating the product Programme and consumption table 24 / ENOperating the product 25 / ENOn the panel Operating the product Auxiliary function selection PrewashRinse Plus 26 / ENTime display Operating the product Starting the programme Progress of programmeLoading door lock Changing the selections after programme has startedCancelling the programme Machine is in Rinse Hold modeChild Lock End of programmeYour machine is equipped with a Standby Mode 30 / ENQuick User Guide 31 / ENCleaning the detergent drawer Cleaning the loading door and the drumMonths Maintenance and cleaning Cleaning the water intake filtersCleaning the body and control panel Draining remaining water and cleaning the pump filterInstall the filter Pull the emergency draining hose out from its seat34 / EN Troubleshooting 35 / ENProgramme cannot be started or selected Machine does not fill with waterTroubleshooting 36 / EN37 / EN It does not rinse well38 / EN Detergent residue in the detergent drawerWater pressure is low. Check the water pressure Foam is overflowing from the detergent drawerOn / Off button might not be pressed. Press On / Off button Loading door may be open. Close the loading door39 / EN Machine does not start. Nothing appears on the displayComplying Commission Delegated Regulation EU No 1061/201 40 / EN

WNF 8441 AE20 specifications

The Blomberg WNF 8441 AE20 is a cutting-edge washing machine that combines efficiency, advanced technology, and user-friendly design. This model stands out in the market due to its impressive features that cater to the needs of modern households.

One of the main features of the WNF 8441 AE20 is its energy efficiency. It boasts an A+++ energy rating, which means it consumes significantly less energy compared to traditional washing machines. This not only helps reduce electricity bills, but it also supports environmentally friendly practices by minimizing carbon footprints.

The washing machine offers a generous 8 kg load capacity, making it suitable for families of various sizes. Its versatile drum is designed to handle different fabric types, ensuring optimal care for all your washing needs. The WNF 8441 AE20 comes equipped with a variety of washing programs, including quick wash options, eco-friendly cycles, and delicate settings for more fragile items. This flexibility allows users to select the most appropriate setting based on their laundry requirements.

Another notable feature of this washing machine is its innovative ProSmart Inverter Motor. This technology enhances the overall performance while reducing noise levels significantly. Users can expect quiet operation, making it ideal for homes where laundry is done at any time of day or night without disturbing family members.

The machine is designed with user convenience in mind, featuring a large LED display that provides clear information about the selected programs and remaining time. The control panel is intuitive, making it easy for users of all ages to operate the machine without confusion. Additionally, the Delay Start function allows users to schedule washes at their convenience, taking advantage of off-peak energy hours.

In terms of safety and maintenance, the Blomberg WNF 8441 AE20 is equipped with a Self-Cleaning Detergent Drawer that ensures optimal performance while keeping the machine clean and free from mold and bacteria. It also features a child lock function, adding an extra layer of safety for households with young children.

Overall, the Blomberg WNF 8441 AE20 is a highly advanced washing machine that combines performance, efficiency, and convenience. With its array of features and innovative technologies, it stands as a reliable choice for those seeking to enhance their laundry experience while being mindful of energy consumption and care for their garments. It represents the perfect blend of practicality and modern design for any home.
Top Page Image Contents