Cannon IWE manual Troubleshooting, Problem Possible causes / Solutions

Page 13

Troubleshooting

Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure

 

GB

that the problem cannot be solved easily using the following list.

Problem:

Possible causes / Solutions:

 

 

The machine does not switch on.

The wash cycle does not start.

The machine does not fill with wa- ter or ‘H20’ flashes in the display.

The machine continuously fills with water and continually drains away or Water left in the drum

or Stuck on wash.

The machine does not drain or spin or F05 error code in the display.

The machine does not heat or poor wash results.

The programme takes too long or The Display changes the esti- mated ‘Time to End’ during the programme.

The machine vibrates a lot during the spin cycle.

•The appliance is not plugged into the socket fully, or not enough to make contact.

•There is no power to the socket, or the fuse has blown in the mains plug.

•The door is not closed properly.

•The ON/OFF button has not been pressed.

•The START/PAUSE button has not been pressed.

•The water tap has not been turned on to allow water to flow into the machine.

•A delayed start has been set.

•The water inlet hose is kinked.

•The water inlet hose is not connected to the water supply.

•The water pressure is too low.

•The water tap has not been turned on to allow water to flow into the machine.

•There is no water supply to the house.

•The inlet valve filter is blocked.

•The START/PAUSE button has not been pressed.

•The top of the drain hose is too low - It must be fitted at a height between 65 and 100 cm from the floor (see “Installation”).

•The drain hose is connected incorrectly to the sink trap allowing water to run into the machine, the drain hose must be positioned higher than the bottom of the sink to prevent water flowing down the drain hose.

•The end of the drain hose has been pushed too far down the standpipe, the

‘U’ bracket should be fitted 100 mm from the end of the drain hose.

•The Pump filter is blocked.

•The drain hose is kinked (see “Installation”).

•New Installation - The blanking cap or spigot has not been removed if connected under a sink.

•The drain hose or sink trap is blocked.

•The wash cycle does not include draining, some wash cycles require the drain phase to be started manually.

•The ‘EASY IRON’ option is enabled, to complete the wash cycle press the

‘START/PAUSE’ button.

•The Spin Speed is set to “OFF”.

•The Temperature is set to “OFF”.

•Programme times will vary due to water pressure, the incoming water tempera- ture and if the wash load goes out of balance. This will increase the programme times accordingly (see ‘ The machine wont spin properly’ below).

•The feet have not been adjusted, enabling the machine to rock.

•New Installation - Either the Transit Bolts including the plastic spacers, or the

Polystyrene Packaging have not been removed when installing the machine.

•The machine is trapped between cabinets and/or walls.

•The load is in a slight out of balance condition and machine is spinning, but at a lower speed.

The machine is noisy.

• There will always be some motor, pump and drum noise during spin.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Washing Machine Instructions for useConnecting the electricity and water supplies InstallationUnpacking and levelling Replacement fuse covers Replacement is obtainedIs accessible without moving the appliance Units etc., please ensure that eitherBution board First wash cycleFollowing code Technical data Control panel Description of the washing machineStart Button Display Setting a delayed start Switch the Machine ON. PressRunning a wash cycle Table of wash cycles Wash cycles and optionsWash options Detergent dispenser drawer Detergents and laundryPreparing the laundry Load balancing systemGeneral safety Precautions and tipsOpening the porthole door manually DisposalCare and maintenance Problem Possible causes / Solutions TroubleshootingPage Assistance Replacement of any removable parts made of glass or plastic195099459.00 After Sales ServiceEssential Contact Information Recycling & Disposal Information
Related manuals
Manual 16 pages 61.23 Kb

IWE specifications

Cannon IWE, a leading player in the field of industrial weighing solutions, is renowned for its innovative approach to load measurement technology. Offering a range of products designed to meet the diverse needs of industries, the Cannon IWE brand stands out for its commitment to precision, durability, and user-friendly functionality.

One of the standout features of Cannon IWE products is their advanced load cell technology. This technology ensures accurate measurement by converting a load or force into an electrical signal. The load cells are engineered to maintain high precision even under challenging conditions, making them ideal for various applications, including manufacturing, logistics, and construction.

Cannon IWE also incorporates robust materials in its design, ensuring that their weighing instruments can withstand harsh environments. Many of their products are built with stainless steel housings, which provide excellent corrosion resistance and protect against the impact of dust and water. This durability makes them suitable for both indoor and outdoor use, as they can function efficiently in diverse environmental conditions.

In terms of connectivity, Cannon IWE products are equipped with the latest wireless technologies. This allows users to monitor and control weights remotely, facilitating improved data collection and analysis. Users can easily integrate these systems into existing workflows, enhancing efficiency and operational effectiveness.

The user interface of Cannon IWE systems is designed with the end-user in mind. The intuitive displays and controls ensure that operators can easily navigate through settings and monitor measurements without extensive training. This usability is a critical factor for industries where time efficiency is crucial.

Moreover, Cannon IWE emphasizes the importance of compliance with international standards. Their weighing systems are often certified to ISO and OIML standards, which not only guarantees precision but also ensures that users meet legal requirements in their respective industries.

Another notable characteristic of Cannon IWE is their commitment to sustainability. The company is continuously exploring ways to reduce their environmental footprint through energy-efficient practices in manufacturing and materials usage.

In conclusion, Cannon IWE stands as a pioneering brand in industrial weighing solutions, characterized by cutting-edge load cell technology, durability, advanced connectivity, user-friendly design, compliance with standards, and a commitment to sustainability. Their comprehensive range of products effectively addresses the demands of modern industries, positioning them as a reliable partner in achieving precision and efficiency in load measurements.
Top Page Image Contents