Electrolux EWD 1214 I manual Something Not Working

Page 20

Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Electrolux Service Force Centre, please carry out the checks listed below.

IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

Symptom

Possible causes

 

 

 

The machine does not start

The door has not been closed.

The plug is not properly inserted in the power socket.

 

 

There is no supply at the socket.

 

The main fuse or the fuse in the plug has blown.

 

The selector dial is not correctly positioned.

 

The ON/OFF button has not been depressed.

 

 

 

The machine does not fill

Ensure the water taps are open.

 

The filters in the inlet hoses are blocked.

 

The inlet hoses may be squashed or kinked.

 

The door has not been closed.

 

 

 

The machine fills then empties

The end of the drain hose is too low.

immediately

The end of the drain hose is submerged in water.

 

There is no vent in the end of the drain hose.

The machine does not empty and/or

The drain hose may be squashed or kinked.

does not spin

The RINSE HOLD option has been selected.

 

The drain filter may be blocked.

 

The drain hose extension, if fitted, is not correct. Follow the

 

 

instructions for connecting to the waste.

 

The drainage system pipes are blocked.

 

The washload is unbalanced: redistribute the clothes inside the drum to

 

 

allow the machine to spin.

There is water on the floor

Too much detergent or unsuitable detergent has been used (creates too

 

 

much foam).

 

Check whether there are any leaks from one of the inlet hose(s) fittings.

 

 

It is not always easy to see this as the water runs down the hose; check

 

 

to see if it is damp.

 

The drain hose may be damaged or not securely positioned.

 

The detergent dispenser drawer or recess is clogged.

 

The drainage system pipes are blocked.

Unsatisfactory washing results

Too little detergent or unsuitable detergent has been used. An

 

 

insufficient amount of detergent leaves the laundry looking grey and

 

 

causes lime scale to form.

 

Stubborn stains have not been treated prior to washing

 

The correct wash programme has not been selected.

 

Too much laundry has been placed in the drum.

The machine vibrates when spinning The internal packing has not been removed.

The machine is in contact with the wall or furniture.

The machine is not stable and level (check diagonally).

The washing load is badly distributed in the drum.

Maybe there is very little laundry in the drum.

20

Image 20
Contents Instruction Booklet Use InstallationChild Safety Contents Interest Environment Your New Washer-DryerEcological hints Child safety feature Description of the ApplianceDetergent dispenser drawer Prewash Main wash Fabric softenerDetergent dispenser drawer Drying indicator light Drying time selector dialSuper Rinse button Rinse Hold buttonOperating Sequence Start the machine At the end of the programmeMeasure out the detergent and the fabric softener Washing 2 KG of Mixed Fabrics AT 50CSelect the programme Select the required timeDrying 2.5 KG of Cotton Turn the programme selector dial clockwise to programme GTurn the programme selector dial clockwise to programme H Select the required optionAutodrying 1 KG of Mixed Fabrics Washing and Drying Hints 1000g = 1 kgWhich detergent? Which form?Washing Programmes Long SpinSynthetic or mixed Wash at 50 C Fabrics, underwear Short SpinSeparate rinse cycle for Rinses DrainDrying Programmes Degree of drying Programme Max. load Spin speed Drying timeWash Care Symbols Important NotesMaintenance and Cleaning Cleaning the water inlet filters Emergency emptying outSomething Not Working Customer Care Service & Spare Parts0870 5 Guarantee Conditions Standard guarantee conditionsEuropean guarantee ExclusionsInstallation Instructions Technical SpecificationsWashing DryingAppliance must be connected to a cold water supply UnpackingWater inlet Water drainage Joining piece must have an internal diameter of 18mmInto a drainage standpipe StandpipeInterest of the environment LevellingSpecial conditions Blue- Neutral Brown- Live Electrical connectionPermanent connection Building-in DoorHinges Mounting the doorDrill four fixing holes see Fig. G

EWD 1214 I specifications

The Electrolux EWD 1214 I is a sophisticated and efficient washing machine that combines advanced technology with superior design, making it an ideal choice for modern households. This front-loading washer is renowned for its excellent cleaning performance and smart features that enhance user convenience.

One of the standout features of the EWD 1214 I is its Energy Efficiency class rating, which demonstrates Electrolux's commitment to sustainability. The machine operates with low water and energy consumption while maintaining powerful cleaning capabilities. This not only helps consumers reduce their utility bills but also minimizes their environmental impact.

The EWD 1214 I boasts a spacious drum capacity, allowing users to wash larger loads in a single cycle. This feature is particularly beneficial for families, as it saves time and reduces the frequency of laundry days. Additionally, the drum is designed with special care for fabrics, ensuring that clothes are treated gently while still achieving exceptional cleaning results.

Equipped with various washing programs, the Electrolux EWD 1214 I caters to a wide range of fabrics and stains. The machine includes specific cycles for delicates, wool, and even a quick wash option for lightly soiled garments. Users can easily customize their wash experience to meet their specific needs.

Another impressive feature is the ProSense technology, which automatically adjusts the washing time and water usage based on the load size. This innovative system not only optimizes resources but also enhances the washing performance, ensuring that each load gets the care it requires.

In terms of usability, the EWD 1214 I has an intuitive interface with a clear display that makes selecting programs straightforward. The delay start option allows users to set the machine to begin washing at a time that suits their schedule, adding flexibility to their laundry routines.

Furthermore, the machine operates quietly, thanks to its advanced motor technology, making it suitable for open-plan living spaces. The well-engineered design also includes features that minimize vibrations, enhancing stability during operation.

In summary, the Electrolux EWD 1214 I represents a blend of efficiency, advanced technology, and user-centric design. With its energy-saving capabilities, versatile washing programs, and smart features, it stands out as a leading choice for anyone looking to upgrade their laundry experience. With this machine, users can expect not just clean clothes, but a more sustainable and convenient way of doing laundry.