Electrolux FWD 1210 manual Installation Instructions, Technical Specifications, Washing, Drying

Page 24

Installation Instructions

It is dangerous to alter the specifications or attempt to modify this product in any way.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Technical Specifications

DIMENSIONS	Height	82 cm
	Width	60 cm
	Depth	54 cm

POWER SUPPLY VOLTAGE		230-240 V/50 Hz
TOTAL POWER ABSORBED		2050 W (10A)

WATER PRESSURE	Minimum	0.05 MPa
	Maximum	00.80 MPa

	Washing
MAX LOAD CAPACITY	Cotton, linen	5 kg
	Synthetics/Mixed Fabrics	2 kg
	Delicate fabrics	2 kg
	Wool	1 kg
	Drying
	Cotton, linen	2.5 kg
	Synthetics	1.5 kg

SPIN SPEED	Maximum	1200 rpm

CONSUMPTION DATA FOR WASHING	Energy	1.15 kWh
5 KG NORMALLY SOILED COTTON	Water	60 litres
ITEMS AT 60°C (PROGR. C)	Time	140 mins

This appliance complies with the following E.E.C. Directives:

-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;

-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

24

Image 24

Contents WASHER-DRYER Installation Child SafetyUse Contents Your New Washer-Dryer Ecological hintsInterest Environment Child safety feature Description of the ApplianceDetergent dispenser drawer Drying indicator light Drying time selector dialQuick Wash button Half Load buttonON/OFF button Mains-on light10Programme selector dial Operating Sequence Start the machine At the end of the programmeTo drain the water and spin, release the same button again Measure out the detergent and the fabric softener Washing 2 KG of Mixed Fabrics AT 50CSelect the programme Select the required timeDrying 2.5 KG of Cotton Select the required option Autodrying 1.5 KG of Mixed FabricsWashing and Drying Hints 1000g = 1 kgDrain pipe, even during the drying cycle Which detergent? Which form?Washing Programmes Synthetic Drying Programmes Store dryIron dry Wash Care Symbols Important NotesMaintenance and Cleaning Emergency emptying out Water inlet filterSomething Not Working Service & Spare Parts 0870 5Guarantee Conditions Standard guarantee conditionsEuropean guarantee Customer CareInstallation Instructions Technical SpecificationsWashing DryingInstallation on a Suspended Floor UnpackingPositioning Water inlet Water drainageAppliance must be connected to a cold water supply Into a drainage standpipeSpecial conditions Interest of the environmentLevelling Onto a sink outlet spigotElectrical connection Permanent connectionBuilding-in DoorHinges Mounting the doorDrill four fixing holes see Fig. G