Start the machine | Electrolux FWD 1210 guide

Electrolux FWD 1210 manual Start the machine, At the end of the programme

Page 9

6. Start the machine

Before starting up the machine check that:

●the appliance is plugged in

●the water supply tap is turned on

●the drain hose is correctly and securely positioned

●the door and the detergent dispenser drawer are closed.

Depress the ON/OFF button : the mains-on light will illuminate and the machine starts operating.

ON/OFF

P0471S

The machine stops automatically.
If you have depressed the RINSE HOLD	button,

the machine will stop with the water of the last rinse left in the tub, to prevent the fabric from creasing.

To drain only, select programme “R”.

The door is controlled by a safety device which releases 2 minutes after the end of the programme.

Switch the machine off by depressing the ON/OFF button again. The mains-on light goes out.

Remove the laundry from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.

Image 9

Contents

WASHER-DRYER Installation Child SafetyUse Contents Your New Washer-Dryer Ecological hintsInterest Environment Child safety feature Description of the Appliance Detergent dispenser drawer Drying time selector dial Drying indicator lightQuick Wash button Half Load buttonON/OFF button Mains-on light10Programme selector dial Operating Sequence Start the machine At the end of the programmeTo drain the water and spin, release the same button again Washing 2 KG of Mixed Fabrics AT 50C Measure out the detergent and the fabric softenerSelect the programme Select the required timeDrying 2.5 KG of Cotton Autodrying 1.5 KG of Mixed Fabrics Select the required optionWashing and Drying Hints 1000g = 1 kgDrain pipe, even during the drying cycle Which form? Which detergent?Washing Programmes Synthetic Drying Programmes Store dryIron dry Important Notes Wash Care SymbolsMaintenance and Cleaning Water inlet filter Emergency emptying outSomething Not Working 0870 5 Service & Spare PartsStandard guarantee conditions Guarantee ConditionsEuropean guarantee Customer CareTechnical Specifications Installation InstructionsWashing DryingInstallation on a Suspended Floor UnpackingPositioning Water drainage Water inletAppliance must be connected to a cold water supply Into a drainage standpipeInterest of the environment Special conditionsLevelling Onto a sink outlet spigotPermanent connection Electrical connectionDoor Building-inHinges Mounting the doorDrill four fixing holes see Fig. G