Electrolux 76825 manual Where to install, Making the appliance level

Page 30

Connect the water inlet hose as described under the paragraph “Water inlet”.

Where to install

Important! The washing machine must not be operated in a room where there is a danger of frost. There is a risk of frost damage or ad- verse effect on the perfomance of the machine. Frost damage is not covered under the warranty.

•The surface on which the appliance is to be installed must be firm and level. Do not install the appliance on carpeted floors or soft floor coverings.

•The surface on which the appliance is to be installed must be clean and dry and free from grease, so that the appliance does not slide.

•If the location in which the appliance is to be installed is fitted with small-format tiles, put a rubber mat (available in the shops) under the appliance.

Making the appliance level

The four feet of the appliance are pre-adjusted.

Large degrees of unevenness can be compensated for by individually ad- justing the height adjustable screw feet.

Use the special spanner supplied to do this.

Important! Do not use pieces of wood, cardboard or such like to lev- el out unevenness in the floor, but adjust the height adjustable screw feet instead.

30

Image 30

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme tables RefreshWashing types and care symbols Care Symbols1 Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent /conditioner Running a wash cycleOpening the door/loading washing Open the door pull the handle on the doorSwitching on the appliance/selecting a programme If you are using liquid detergentWashing powder/tablets for the main wash cycle Changing the spin speed/selecting rinse hold Selecting additional programmesShortened wash programme for lightly soiled items Setting the delay timer PRE WashInterrupting a programme/adding washing Starting a programmeProgramme sequence Interrupting a programmeEnd of the wash cycle/removing the washing OverdosingIf Rinse Hold has been selected Cleaning procedure Child safety deviceCleaning and maintenance Deactivating the child safety deviceWashing drum Clean the glass in the door and the rubber collar regularlyDetergent dispenser drawer Door and rubber collarRemedying small faults yourself What to do ifBeen removed Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Disposal Packaging materialOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine UnpackingPage Remove the bracket D Tighten up the six smaller bolts C Where to install Making the appliance levelBrown Live Wire coloured green and yellow Electrical ConnectionConnecting to the water supply Permanent ConnectionPermitted water pressure Water inlet Water DrainageOpen the porthole and extract the inlet hose From your Service Force Centre Pumping heights of over 1 metreFor drainage into an outlet Guarantee/Customer Service Great BritainEuropean Guarantee LU4 9QQMagyarország +36 Page For general enquiries concerning 0870 5 929Customer Care Major Appliances132 977 Subject to change without notice