Electrolux 76825 manual General safety, Resulting overheating may constitute a fire hazard

Page 6

General safety

•Repairs to the washing machine may only be carried out by qualified/ authorised service engineers.

•Never use the appliance when the electrical cable is damaged or the control panel, worktop or plinth area are damaged to such an extent that the inside of the appliance is openly accessible.

•Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – switch off the cut- out in the fuse box or completely remove the fuse.

•If operation is stopped, disconnect the appliance from the mains sup- ply and turn off the tap.

•Never remove the power plug from the power point by pulling on the cable. Always pull the plug.

•Multiway-plugs, connectors and extension cables must not be used.

Resulting overheating may constitute a fire hazard.

•Never wash the washing machine down with a water jet. Danger of electric shock.

•When using wash programmes with high temperatures the glass in the door will become hot. Do not touch it!

•Before emergency emptying of the appliance, before cleaning the drain pump or opening the door in an emergency, let the water cool down.

•Small animals can nibble on electrical cables and water hoses. This can constitute a risk of electrocution and water damage. Keep small animals away from the washing machine.

6

Image 6

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme tables RefreshWashing types and care symbols Care Symbols1 Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent /conditioner Running a wash cycleOpening the door/loading washing Open the door pull the handle on the doorSwitching on the appliance/selecting a programme If you are using liquid detergentWashing powder/tablets for the main wash cycle Changing the spin speed/selecting rinse hold Selecting additional programmesShortened wash programme for lightly soiled items Setting the delay timer PRE WashInterrupting a programme/adding washing Starting a programmeProgramme sequence Interrupting a programmeEnd of the wash cycle/removing the washing OverdosingIf Rinse Hold has been selected Cleaning procedure Child safety deviceCleaning and maintenance Deactivating the child safety deviceWashing drum Clean the glass in the door and the rubber collar regularlyDetergent dispenser drawer Door and rubber collarRemedying small faults yourself What to do ifBeen removed Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Disposal Packaging materialOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine UnpackingPage Remove the bracket D Tighten up the six smaller bolts C Where to install Making the appliance levelBrown Live Wire coloured green and yellow Electrical ConnectionConnecting to the water supply Permanent ConnectionPermitted water pressure Water inlet Water DrainageOpen the porthole and extract the inlet hose From your Service Force Centre Pumping heights of over 1 metreFor drainage into an outlet Guarantee/Customer Service Great BritainEuropean Guarantee LU4 9QQMagyarország +36 Page For general enquiries concerning 0870 5 929Customer Care Major Appliances132 977 Subject to change without notice