6electrolux
Temperature
This button allows you to increase or de- crease the washing temperature.
Spin Reduction
By pressing this button you can change the spin speed of the selected programme.
Select the Automatic Dry
By pressing this button you can choose the required degree of drying for cottons and synthetics:
•Extra dry (Cottons)
•Store dry (Cottons and Synthetics)
•Iron dry (Cottons)
The icon of the selected dryness degree will be marked with a line above and below the selected degree of drying.
Drying Time
If you wish to carry out a timed drying pro- gramme, press this button until the drying time you want appears on the display ac-
Display
7.1 | 7.2 |
| 7.3 |
| 7.4 |
| 7.5 |
cording to the fabrics (cottons or synthetics) you have to dry. For Cottons you can select a drying time from 10 minutes to 250 minutes (4.10). For Synthetics you can select a drying time from 10 minutes to 130 minutes (2.10). Every time you press this button the drying time increases by 5 mins.
Delay Start
The programme can be delayed from 30 min
-60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.
Start Pause
This button allows you to start or to interrupt the selected programme.
Time Manager
These buttons allows you to modify the pro- gramme duration automatically proposed by the appliance.
7.13 7.12 7.11
7.10
7.6 |
| 7.7 |
| 7.8 |
| 7.9 |
The display shows the following information: 7.1: Temperature value
7.2: Temperature icons 
, Cold 
. During the washing cycle the display shows the temperature icon animated to indicate that the appliance has started the heating phase of the water in the tub.
7.3: Spin value
7.4: Spin speed icons.
•No spin 
•Rinse Hold 
•Night Cycle 
During the spinning phase the spiral is ani- mated.
No spin option eliminates all the spin phases and increases the number of rinses for some programmes.
Rinse Hold: by selecting this option the wa- ter of the last rinse is not emptied out to pre-
vent the fabrics from creasing. When the pro- gramme has finished the display shows three blinking 0.00 , the light of button 8 is off and the door is locked to indicate that the water must be emptied out. To empty out the wa- ter, please read the paragraph «At the end of the programme».
Night Cycle: by selecting this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this wash- ing cycle is very noiseless and it can be se- lected at night or in times with a more eco- nomical power rate. On some programmes the rinses will be performed with more water. When the programme has finished, the dis- play shows three blinking 0.00 , the light of button 8 is off and the door is locked to indi- cate that the water must be emptied out. To