Select the required programme by turning the programme selector dial (1)
Turn the programme selector dial to the re- quired programme. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating the corre- sponding buttons. The green pilot light of the button 8 starts to flash.
The selector dial can be turned either clock- wise or counterclockwise. Turn to position 
to reset programme/Switching the ma-
chine off.
At the end of the programme the selec- tor dial must be turned to position 
, to switch the machine off.
Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 8 will blink 3 times and the message Err is displayed to indicate a wrong selection. The machine will not perform the new selected programme.
Programme Option buttons
Depending on the programme, different functions can be combined. These must be selected after choosing the desired pro- gramme and before pressing the button 8 .
electrolux 9
Select the temperature by pressing button 2
By selecting a programme, the appliance proposes automatically a default tempera- ture.
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a different temper- ature.
Reduce the spin speed by pressing button 3
By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme.
Press button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed.
Select an additional rinse
This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (Extra Rinse). To activate this option press simultaneously the buttons 4 and 6 for some seconds. The Extra Rinse icon will ap- pear on the display. This function stays per- manently on. To remove it press the buttons 4 and 6 again until the Extra Rinse icon dis- appears.
Select the Delay Start by pressing button 6
Before you start the programme, if you wish to delay the start, press the button 6 repeat- edly, to select the desired delay. The corre- sponding icon 7.13 will appear on the display in the upper part of the display.
The selected delay time value (up to 20 hours) will appear on the display a few sec- onds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you press button
8.
You can cancel or modify the delay time at any moment, before you press button 8 . Selecting the delayed start:
1.Select the programme and the required options.
2.Select the delay start by pressing the but- ton 6 .