Safety
Equator Appliances is proud
to offer our customers
products with the ENERGY
STAR label.
INTRODUCTION
Your new appliance is carefully engineered product. Many times what appears to be a reason to call for service, requires nothing more than a simple adjustment you can easily make in your own home.
You will be charged for a service call while the appliance is in warranty if the problem is not caused by defective product workmanship or materials covered by this warranty.
To avoid a charge for an unnecessary service call, and before calling a serviceman, please refer to the troubleshooting section for situations that you can remedy. This section is included on pages
Your
You will obviously want to obtain the best possible wash. By reading and following the instructions in this booklet you will achieve excellent results.
Please, ensure that the instructions are followed. If you should need any further advice or assistance, please, contact the dealer where your machine was purchased, or call Equator Customer Service at
This appliance is an automatic washer with a capacity of up to:
- WASH | 11 Lbs |
- WASH & DRYING | 8 Lbs dry weight of clothes |
PRE-INSTALLATION
1.The washer must be installed on a strong level floor, and in
protected, dry, and
2.Installation on Carpet or Wood increases vibrations.
• Carpets - place on light carpet only.
• Wood - brace floor with screws and place additional sheets of plywood before installation.
3.Dryer installation and grounding should be done in accordance with local codes by a qualified installer. “Installation Instructions” are included in your Use and Care manual for the Installer’ s reference.
4.The washer should be plugged into a properly grounded three (3) prong electrical outlet of 120 Volt, 1300 W, 13 A,
60Hz. It should not be controlled by a wall switch or pull cord which might be turned off accidentally.
5 Instructions for installation and use