JVC KD-LH2000R manual Troubleshooting, Symptoms Causes Remedies

Page 54

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

		Symptoms	Causes		Remedies

	•	Sound is sometimes	You are driving on rough	Stop playback while driving on
	•	Sound is sometimes	You are driving on rough	Stop playback while driving on
		interrupted.	roads.	rough roads.

			Disc is scratched.	Change the disc.

			Connections are incorrect.	Check the cords and
				connections.

	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.

			Connections are incorrect.	Check the cords and
				connections.

Playback	•	CD cannot be played back.	Disc is inserted upside down.	Insert the disc correctly.

	•	Tracks on the CD-R/CD-RW	CD-R/CD-RW is not finalized.	•	Finalize the CD-R/CD-RW
	•	CD-R/CD-RW cannot be	CD-R/CD-RW is not finalized.	•	Insert a finalized
		played back.			CD-R/CD-RW.
General		cannot be skipped.			with the component which
General					you used for recording.
					you used for recording.
					(See page 56.)

	•	“No Disc” flashes on the	No disc in the loading slot.	Insert a disc into the loading slot.
		display .
		display .	Disc is inserted incorrectly.	Insert the disc correctly.
			Disc is inserted incorrectly.	Insert the disc correctly.

	•	Disc cannot be ejected.	Disc is locked.	Unlock the disc (See page 22.)

	•	This unit does not work at	The built-in microcomputer	Press the reset button on the
		all.	may have functioned	panel holder using a ball-point
			incorrectly due to noise, etc.	pen after detaching the control
				panel. (The clock setting and
				preset stations stored in memory
				are erased.) (See page 2.)

	•	“Panel Connect Error”	The control panel is not	Remove the control panel, wipe
		appears on the display.	attached correctly and firmly.	the connectors, then attach it
				again. (See page 43.)


	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
		Sequential Memory)
FM/AM		automatic preset does not
FM/AM		work.
		work.
	•	Static noise while listening	The antenna is not connected	Connect the antenna firmly.
		to the radio.	firmly.

54

Image 54

Contents KD-LH2000R How to reset your unit How to use the Mode M buttonPosition And Reproduction Of Labels Contents Mode M button Location of the ButtonsControl panel Remote controller Remove the battery holder Preparing the remote controllerInstalling the battery Place the batteryTo turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsTo cancel the display demonstration, follow Press Disp DSee pages 36 Select Off Radio Operations Listening to the radioSearching for a station automatically Auto search When an FM stereo broadcast is hard to receive Searching for a station manually Manual searchSelect the band FM1 3, AM FM1 FM2 FM3 AM Storing stations in memory FM station automatic preset SSMManual preset Select the FM band FM1 3 you want to store FM stations intoTuning in to a preset station Selecting a preset station directlySelecting a preset station using the preset station list When receiving an AM or FM non-RDS station When receiving an FM RDS station see the following pagesChanging the display pattern To use Network-Tracking Reception RDS OperationsWhat you can do with RDS Same programme can be received on different frequenciesTo deactivate the TA Standby Reception, press Using TA Standby ReceptionPress TP/PTY T to activate TA Standby Reception TP/PTY T againUsing PTY Standby Reception Press and hold TP/PTY T for more than 2 seconds Searching for your favorite programmeSelect one of the twenty-nine PTY codes See Last selected PTY code appearsStart PTY search Other convenient RDS functions and adjustmentsSetting the TA volume level For your favoriteAutomatic clock adjustment PTY codesTo stop play and eject the disc CD OperationsPlaying a CD Open the control panel Insert a disc into the loading slotTo go to the next or previous tracks Locating a track or a particular portion on a CDTo fast-forward or reverse the track To go to a particular track directlyWhile pressing CD/CD-CH, press Hold for more than 2 seconds To cancel the prohibition and unlock the discProhibiting CD ejection To play back tracks repeatedly Repeat PlayChanging the display pattern Other Main Features in this unit What is MP3?Precautions when recording MP3 files on a CD-R or CD-RW MP3 IntroductionHierarchy MP3 directory/file configurationMP3 playback/search order Level6MP3 Operations Playing an MP3 discTo go to a particular directory directly Selecting a directoryTo fast-forward or reverse the file To skip to the next or previous filesTo select a directory on the list shown on the display To skip to the next directoryTo skip to the previous directory Select the number 1 6 for the directory you wantRepeat 1 Repeat Repeat Off To play back only intros Intro ScanTo play back files repeatedly Repeat Play Intro 1 Intro Intro OffBy pressing Disp D, you can change Information shown on the displayAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustStoring your own sound adjustments Selecting preset sound modes iEQ i-equalizerSound adjustment items Store the adjustment in the selected user sound modeLevel Meter Press EQ equalizer twice while Mode is still on the displayActivating the level meter Select the level meter pattern you wantBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items To set the movie demo-MovieDemo To select the dimmer mode-DimmerTo change the FM tuner selectivity- if Filter To adjust the display contrast level- ContrastTo select the display illumination pattern-LCD Type To turn on/off the key-touch tone-BeepSelect Source as the Mode color mode setting Setting the desired color for each source-SourceSelect Mode Source User Enter the source selecting modeLine Selecting or adjusting your own color- UserEnter the color selecting mode Select the display color As you turn the control dial, the colors change as followsUser Mode Turn the control dial to adjust the selected primary colorRed Green Blue Move the cursor to the next Or previous character position To erase the entered charactersSelect a character Select a source you want to assign a name toDetaching the control panel You can detach the control panel when leaving the carDetaching the control panel Attaching the control panelTo change the information shown on the display CD Changer OperationsPlaying CDs Select the CD automatic changer CD-CHTo go to a particular disc directly Selecting a discTo go to the next track or the previous tracks To go to the next discs or the previous discsTo play back tracks at random Random Play To select a disc using the disc listsSelecting CD playback modes Display can show only six disc names at a timePlays the beginnings External Component Operations Select the external component LineSelect the DAB tuner Tuning in to an ensemble and one of the servicesWhat is DAB system? Select the DAB band DAB1, DAB2 or DAB3To tune in to a particular ensemble without searching Storing DAB services in memoryTo restore the FM/AM tuner Start searching for an ensembleTuning in to a preset DAB service Selecting a preset service directlyTo use Alternative Reception Selecting a preset service using the preset service listWhile receiving a DAB service You can keep listening to the same programRadio text information Troubleshooting Symptoms Causes RemediesSymptoms Causes Remedies Maintenance Handling discsFM Tuner SpecificationsAvailable characters MW TunerHaving Trouble with operation?