JVC KD-LH2000R manual Specifications, Available characters, FM Tuner, MW Tuner, LW Tuner

Page 57

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:	50 W per channel
Rear:	50 W per channel
Continuous Power Output (RMS):
Front:	19 W per channel into 4 Ω, 40 Hz
	to 20 000 Hz at no more than
	0.8% total harmonic distortion.
Rear:	19 W per channel into 4 Ω, 40 Hz
	to 20 000 Hz at no more than
	0.8% total harmonic distortion.
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Equalizer Control Range:
Low:	±06 (50 Hz, 80 Hz, 120 Hz)
Mid:	±06 (700 Hz, 1 kHz, 2 kHz)
High:	±06 (8 kHz, 12 kHz)

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 2.0 V/20 kΩ load

Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range:
FM:	87.5 MHz to 108.0 MHz
AM:	(MW)	522 kHz to	1 620 kHz
	(LW)	144 kHz to	279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 ∝V/75 Ω)

50dB Quieting Sensitivity: 16.3 dBf (1.8 ∝V/75 Ω) Alternate Channel Selectivity (400 kHz): 65 dB Frequency Response: 40 Hz to 15 000 Hz Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 ∝V

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 ∝V

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MP3 recording format: MPEG 1/2 Audio Layer 3

Max. Bit Rate: 320 Kbps

	GENERAL
	GENERAL	ENGLISH
	Power Requirement:
	Operating Voltage: DC 14.4 V
	(11 V to 16 V allowance)
	Grounding System: Negative ground
	Allowable Operating Temperature: 0°C to +40°C
	Allowable Operating Temperature: 0°C to +40°C
	Dimensions (W ⋅ H ⋅ D):
	Installation Size: 182 mm ⋅ 52 mm ⋅ 150 mm
	Panel Size: 188 mm ⋅ 58 mm ⋅ 14 mm
	Mass: 1.4 kg (excluding accessories)
	Design and specifications are subject to change
	without notice.

Available characters

You can use the following characters to assign names to CDs, and external components (see page 42). In addition, these characters are used to display the information such as RDS, ID3v1 tags, DAB, and so on.

Numbers and symbols

Accented letters
Capital	Small

57

Image 57

Contents KD-LH2000R How to reset your unit How to use the Mode M buttonPosition And Reproduction Of Labels Contents Mode M button Location of the ButtonsControl panel Remote controller Installing the battery Preparing the remote controllerRemove the battery holder Place the batteryTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsTo cancel the display demonstration, follow Press Disp DSee pages 36 Select Off Radio Operations Listening to the radioSearching for a station automatically Auto search When an FM stereo broadcast is hard to receive Searching for a station manually Manual searchSelect the band FM1 3, AM FM1 FM2 FM3 AM Manual preset FM station automatic preset SSMStoring stations in memory Select the FM band FM1 3 you want to store FM stations intoTuning in to a preset station Selecting a preset station directlySelecting a preset station using the preset station list When receiving an AM or FM non-RDS station When receiving an FM RDS station see the following pagesChanging the display pattern What you can do with RDS RDS OperationsTo use Network-Tracking Reception Same programme can be received on different frequenciesPress TP/PTY T to activate TA Standby Reception Using TA Standby ReceptionTo deactivate the TA Standby Reception, press TP/PTY T againUsing PTY Standby Reception Select one of the twenty-nine PTY codes See Searching for your favorite programmePress and hold TP/PTY T for more than 2 seconds Last selected PTY code appearsSetting the TA volume level Other convenient RDS functions and adjustmentsStart PTY search For your favoritePTY codes Automatic clock adjustmentPlaying a CD CD OperationsTo stop play and eject the disc Open the control panel Insert a disc into the loading slotTo fast-forward or reverse the track Locating a track or a particular portion on a CDTo go to the next or previous tracks To go to a particular track directlyProhibiting CD ejection To cancel the prohibition and unlock the discWhile pressing CD/CD-CH, press Hold for more than 2 seconds To play back tracks repeatedly Repeat PlayChanging the display pattern Precautions when recording MP3 files on a CD-R or CD-RW What is MP3?Other Main Features in this unit MP3 IntroductionMP3 playback/search order MP3 directory/file configurationHierarchy Level6Playing an MP3 disc MP3 OperationsTo fast-forward or reverse the file Selecting a directoryTo go to a particular directory directly To skip to the next or previous filesTo skip to the previous directory To skip to the next directoryTo select a directory on the list shown on the display Select the number 1 6 for the directory you wantTo play back files repeatedly Repeat Play To play back only intros Intro ScanRepeat 1 Repeat Repeat Off Intro 1 Intro Intro OffInformation shown on the display By pressing Disp D, you can changeAdjusting the sound Sound AdjustmentsAdjust the level Select the item you want to adjustSelecting preset sound modes iEQ i-equalizer Storing your own sound adjustmentsStore the adjustment in the selected user sound mode Sound adjustment itemsActivating the level meter Press EQ equalizer twice while Mode is still on the displayLevel Meter Select the level meter pattern you wantOther Main Functions Basic ProcedurePreferred Setting Mode PSM items To select the dimmer mode-Dimmer To set the movie demo-MovieDemoTo select the display illumination pattern-LCD Type To adjust the display contrast level- ContrastTo change the FM tuner selectivity- if Filter To turn on/off the key-touch tone-BeepSelect Mode Setting the desired color for each source-SourceSelect Source as the Mode color mode setting Source User Enter the source selecting modeEnter the color selecting mode Select the display color Selecting or adjusting your own color- UserLine As you turn the control dial, the colors change as followsUser Mode Turn the control dial to adjust the selected primary colorRed Green Blue Select a character To erase the entered charactersMove the cursor to the next Or previous character position Select a source you want to assign a name toDetaching the control panel You can detach the control panel when leaving the carDetaching the control panel Attaching the control panelPlaying CDs CD Changer OperationsTo change the information shown on the display Select the CD automatic changer CD-CHTo go to the next track or the previous tracks Selecting a discTo go to a particular disc directly To go to the next discs or the previous discsSelecting CD playback modes To select a disc using the disc listsTo play back tracks at random Random Play Display can show only six disc names at a timePlays the beginnings Select the external component Line External Component OperationsWhat is DAB system? Tuning in to an ensemble and one of the servicesSelect the DAB tuner Select the DAB band DAB1, DAB2 or DAB3To restore the FM/AM tuner Storing DAB services in memoryTo tune in to a particular ensemble without searching Start searching for an ensembleSelecting a preset service directly Tuning in to a preset DAB serviceWhile receiving a DAB service Selecting a preset service using the preset service listTo use Alternative Reception You can keep listening to the same programRadio text information Symptoms Causes Remedies TroubleshootingSymptoms Causes Remedies Handling discs MaintenanceAvailable characters SpecificationsFM Tuner MW TunerHaving Trouble with operation?