Hotpoint WDF 740 X Description of the Washer-dryer and starting a wash cycle, Wash Cycle knob

Description of the Washer-dryer and starting a wash cycle

	Control panel
GB

ON/OFF

button with indicator light

WASH CYCLE PROGRESS

indicator lights

DISPLAY

TEMPERATURE

button

DOOR

LOCKED

indicator light

Detergent dispenser drawer

DRYING

button

WASH CYCLE knob

CHILD LOCK

FUNCTION

buttons with indicator lights

START/PAUSE

button with indicator light

button with indicator light

Detergent dispenser drawer: used to dispense de- tergents and washing additives (see “Detergents and laundry”).

ON/OFF button with indicator light: switches the machi- ne on and off.

If the indicator light is illuminated, this indicates that the machine is switched on.

WASH CYCLE knob: programmes the wash cycles. During the wash cycle, the knob does not move.

DRYING button: used to set the desired drying pro- gramme (see “Personalisation”).

TEMPERATURE button: sets the temperature or the cold wash cycle (see “Personalisation”).

DISPLAY: indicates the time remaining for the selected wash cycle and, if a delayed start has been programmed, the time remaining until the start of the wash cycle.

CHILD LOCK button with indicator light: activates or deactivates the control panel lock.

FUNCTION buttons with indicator light: used to select the available functions. The indicator light corresponding to the selected function will remain lit.

WASH CYCLE PROGRESS indicator lights: used to mo- nitor the progress of the wash cycle.

The illuminated indicator light shows which phase is in progress.

DOOR LOCKED indicator light: indicates whether the door may be opened or not (see next page).

START/PAUSE button with indicator light: starts or temporarily interrupts the wash cycles.

N.B. To pause the wash cycle in progress, press this button; the corresponding indicator light will flash orange, while the indicator light for the current wash cycle phase will remain lit in a fixed manner. If the DOOR LOCKED indicator light is switched off, the door may be opened.

To start the wash cycle from the point at which it was interrupted, press this button again.

Standby mode

This washing machine, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again.

6