Variable Temp.
Press Button | Action | Infobubble™ Display |
|
|
|
x 1 & Hold | Reduce programmed temperature in 5 C intervals |
|
| to a minimum of 30 C |
|
|
|
|
x 2 | Cancel |
|
Variable Rinse
●Not available with programme ‘F’.
Press Button | Action | Infobubble™ Display |
|
|
|
x 1 | Add a rinse for sensitive skin |
|
|
|
|
x 2 | Delete a rinse to save time and water |
|
|
|
|
x 3 | Return to normal programme setting |
|
Variable Spin
Press Button | Action | Infobubble™ Display |
|
|
|
x 1 | Display existing programme spin speed. |
|
|
|
|
x 2 & Hold | Reduce spin speed by 100rpm intervals |
|
| to 400rpm or ‘0’ (no spin). |
|
|
|
|
x 3 | Return to normal programme setting. |
|
Drying Prog./Drying Time
●Not available with programme ‘F’.
Press Button | Action | Infobubble™ Display |
|
|
|
x 1 | Selects low heat programme. |
|
|
|
|
x 2 | Selects full heat programme. |
|
Note: To increase drying time by 10 minute increments up to 120 minutes, press and hold button.
Start, Buzzer/Time Delay
Press Button | Action | Infobubble™ Display |
|
|
|
x 1 & Hold | Buzzer - | Lets you know when the programme has |
|
| finished or when Rinse Hold is activated. |
Time Delay - Gives you the option to delay your wash programme from 1 to 18 hours.
Note: When the button is released the programme will start automatically and the Infobubble™ will display ‘Starting Programme’.
Cancel Button
To start the selection again, press and hold the cancel button for a few seconds, all settings displayed will disappear and the Infobubble™ will display ‘Select Programme’.
Note: If pressed when setting ‘Time Delay’ or when time delay is active, time delay is cancelled but the selected wash programme and optional wash features will remain, the Infobubble™ will display these. Press start to proceed with the programme.
16