WARNING
●Do not dispense detergent tablets from the dispenser drawer. Refer to detergent manufacturer’s instructions.
●Do not use a dosing ball to dispense detergent when using a wash and auto dry programme.
Changing the
Main Wash
Indicator
The Main Wash Indicator has been fitted, ready to dispense ‘Powder’ detergent only.
1 Pull drawer out until it reaches its stop.
Dispensing Liquid Detergent
| Max.– 150ml. |
| 100ml. |
| 50ml. |
Fig 1 | Fig 2 |
Refer to detergent manufacturer’s instructions for dosage and pour liquid into the compartment (Fig 1).
Note: The ‘Liquid Detergent’ Main Wash Indicator features 3 lines which represent the dosage of liquid to be used (Fig 2). We recommend that you do not exceed the maximum limit of 150ml.
Dispensing
Powder
Detergent
To achieve optimum wash results we recommend that you use the detergent manufacturer’s dispensing
cup to dispense no more than
2 Press down on button to release drawer latch, remove drawer.
300 ml of powder (Fig 3).
Dispensing
Fabric
Conditioner
Fig 3
3 Lift ‘Powder’ indicator out of slots, rotate and reposition for ‘Liquid’ ensuring it is secure.
Pour fabric conditioner into compartment (Fig 4). We recommend that you do not exceed the maximum level indicated.
Fig 4
Using a Dosing Ball
4
Fig 5
To obtain claimed energy label
wash performance for a 60°C cotton wash, dispense powder detergent in a dosing ball, placed in an upright position in the centre of the wash load (Fig 5).
To receive a ‘FREE’ dosing ball, phone: UK 0800 243 131 or Republic of Ireland:
1800 386 386
18