Error Messages...
If at anytime the following error messages are displayed in the Infobubble™ please follow our recommendations before calling a Service Engineer.
Error Code | Problem | Recommendation |
E10
E11
E13
No hot/cold fill. | Check the water supply, inlet |
| valve and hot and cold hose |
| connections (see ‘Connect to the |
| Water Supply’ on page 6). |
E14 | A fault with the water heating | |
has occurred. | ||
|
Call for a Service Engineer.
E15
Water is not being pumped out
and a flood condition could occur.
Check the drainage hose is raised to the recommended minimum height and that it is not blocked (see ‘Connect to a Drainage System’ on page 7). If it still not working, call for a Service Engineer.
E16 | Extremely high water level. | Disconnect or turn off the water |
|
| supply and ensure that the water |
|
| level does not rise anymore. |
|
| Call for a Service Engineer. |
|
|
|
E17 | Door not closed properly | (see ‘Interlocking Door System’ |
|
| on page 9). |
E30
E31
A motor drive problem has occurred.
Try running the programme again. If the problem persists call for a Service Engineer.
E50
E51
Customer language and wash programme have not been saved,system will run with default conditions (1000rpm max and English language).
Call for a Service Engineer to
21