Care and maintenance

Cutting off the water and electricity sup- GB plies

•Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks.

•Unplug the washing machine when cleaning it and du- ring all maintenance work.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump which does not require any maintenance. Sometimes, small items (such as coins or buttons) may fall into the pre-chamber which protects the pump, situated in its bottom part.

!Make sure the wash cycle has finished and unplug the appliance.

Cleaning the washing machine

The outer parts and rubber components of the applian- ce can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.

Note (only for INOX model): the external surfaces of the machine and the control panel may be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive product.

Cleaning the detergent dispenser drawer

To access the pre-chamber:

1. using a screwdriver, remove the cover panel on the lower front part of the washing machine (see figure);

Remove the dispenser by raising it and pulling it out (see figure).

Wash it under running wa- ter; this operation should be repeated frequently.

2. unscrew the lid by rota- ting it anti-clockwise (see figure): a little water may trickle out. This is per- fectly normal;

Caring for the door and drum of your appliance

•Always leave the porthole door ajar in order to pre- vent unpleasant odours from forming.

3.clean the inside thoroughly;

4.screw the lid back on;

5.reposition the panel, making sure the hooks are secu- rely in place before you push it onto the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If there are any cracks, it should be replaced immediately: during the wash cycles, water pressure is very strong and a cra- cked hose could easily split open.

! Never use second-hand hoses.