INSTRUCTIONS FOR INSTALLATION & USE
WD63, WD64
Hotpoint recommends, for your own safety and to ensure you get the best possible results from your Washer
Dryer, you read through this booklet and follow these steps thoroughly.
STEP 1 Electrical Guide
Choose a location for your washer dryer, where possible on a solid floor, with the electrical sockets and water supply taps easily accessible.
Allow sufficient space: 600mm width, 600m depth and 900mm height.
DO NOT install in a bath or shower room.
WARNING: This appliance must be earthed.
STEP 3 Dispenser Drawer
Read through this section to familiarise yourself with the different compartments within the dispenser drawer.
Hotpoint recommend the Persil range of detergent products.
NOTE: Always follow manufacturer’s dosage recommendations.
STEP 2 Installation Guide
Dispose of packaging material in a safe place and remove any labels.
Please read through thoroughly to ensure you understand each stage before you begin.
Remember you may be charged for a service call if a problem with your washer dryer is caused by incorrect installation or misuse.
STEP 4 Wash Guide
A wash chart is provided to help you to select your required programme.
Examples given for the maximum washing load weight for different fabric types.
STEP 5 Options Guide
All available optional wash features are explained within this section - These allow you to adjust your selected wash programme to suit your needs.
NOTE: In addition to the temperature of the incoming water, the selection of optional wash features will affect the programme times.
STEP 6 Drying Guide
A guide to drying times is provided for independent drying programmes, along with a list of items not suitable for tumble drying.
Examples given for the maximum drying load weight for different fabric types.
NOTE: Always make sure the mains button is in the OFF position before selecting an independent drying programme.
STEP 7 Wash & Auto Dry Programme
A picture guide provides a clear explanation how to set a wash and auto dry programme.
DO NOT overload the washer dryer.
NOTE: Hotpoint recommend, on completion of your programme, that you switch off both the electricity and water supply to the appliance.
STEP 8
READ BEFORE CONTACTING SERVICE!
Troubleshooting
Please refer to the Troubleshooting section if you have any problems when using your washer dryer.
There may be nothing wrong!
Read the rest of these instructions to get the best from your appliance, remember to fill in your guarantee registration.
Keep these instructions in a safe place for quick reference.