shooting
ES NOT
TER
en installed ✗
standpipe
✗
MY MACHINE IS LEAKING
Are the fill hoses on correctly?
If not tighten them.
THE PROGRAMME TAKES A
LONG TIME
Check for low temperature and low pressure for the hot and cold water supply
OUT OF BALANCE!
tions free es?
selected?
the button ✗ in.
d’ button
lation
that have
ected to em?
nd of the unit has
.
IN THE
NSER
NT
er drawer.
spenser
Is your water pressure too
high?
✓
Turn the main supply tap
down.
Is the standpipe or household
drain blocked.
✓
You may need to call in a
plumber.
Is steam coming from the
dispenser drawer?
✓
The machine is designed to
release steam from the dispenser
drawer during hot washes.
Check the feet have been
levelled.
Did you know that putting one or two highly absorbent items in your machine
✗can cause it to become ‘OUT OF BALANCE’.
| SUDS ARE COMING FROM | This happens because the items are | |
| THE DISPENSER DRAWER | clumping together, retaining large | |
|
| amounts of water and therefore acting | |
|
| as a heavy weight in your machine. | |
✗ | Check the correct amount of | When your machine is ‘out of balance’ it | |
will not spin. | |||
| suitable detergent has been | ||
|
| ||
| used, refer to manufacturer’s | Try adding a large item such as a | |
| recommendations. | ||
| bedding sheet into the load. This will | ||
|
| ||
|
| not absorb as much water and will help | |
|
| to spread the weight in the drum. |
✗THE LAUNDRY IS NOT DRY
AFTER USING THE DRY
PROGRAMME
Is the cold water turned on at the ✗ | If the appliance is still not working | |
tap? |
| contact: |
|
| |
✓ |
| Repair Service and Information Desk |
| UK 08709 066 066 | |
|
| Republic of Ireland 1850302 200 |
Did you select the right heat/time |
| You will be asked for the following |
setting? | ✗ | |
| details: Name and Address, Post | |
|
| |
✓ |
| Code,Telephone Number, Date of |
| Purchase, Colour and Model/Serial | |
Was the laundry spun dry at the |
| Numbers - which can be found on |
end of a wash programme, if not |
| the inside of the door. |
select a spin and dry option to |
| Clear and precise details of the query |
suit the fabric type. |
| or fault. |