Operating Instructions
Running a Wash Cycle
Brief Instructions
To run a wash cycle:
01. Open the door and fill with washing.
2.Close the door.
3.Add washing detergent / care agent.
4.Set the wash programme
–Set the programme using the programme knob;
–Set the temperature using the temperature selector;
–Set any additional programme required.
5.If necessary, change the spin speed or select RINSE HOLD.
You can alter this setting and the temperature at any time during the wash.
6.Press ON/OFF button. Power indicator light comes on. The washing ma- chine has been switched on. The wash programme will start.
When the wash programme has been completed:
Important! If the wash cycle ends on rinse hold run PUMP OUT or SPIN before opening the door.
3 | For safety reasons, the door remains locked for |
| end of the programme. |
7.Open the door and remove the washing.
8.Press ON/OFF button. The power indicator light will go out. The washing machine is switched off.
19