AEG W 1230 manual Feet are not correctly set Tion and connection

Operating Instructions

Problem

Possible Cause

Remedy

The transport packaging has

Remove transport packaging

according to the installation

not been removed.

and connection instructions.

The height-adjustable screw

Adjust the feet according to

the instructions for installa-

feet are not correctly set.

tion and connection.

The washing machine

There is very little washing in

This does not impair the

vibrates during opera-

tion or wobbles.

the drum (e.g. only one

function.

dressing gown).

The water could not be com-

Check along the drain hose

and remove any kinks

pletely pumped out before

present, or clean the drain

spinning because

pump and, if necessary, re-

the drain hose is bent or

move foreign bodies from

the drain pump is blocked.

the pump housing.

The screw connection on the

Tighten the inlet hose screw

inlet hose is leaky.

connection.

The drain hose leaks.

Check the drain hose and re-

place it if necessary.

The drain pump cover is not

Close cover correctly.

correctly closed.

Water runs out under

Interrupt the programme

and remove washing from

the washing machine.

Washing is stuck in the door.

the door. Start the pro-

gramme again.

Seal the emergency drain

hose correctly (see section

Emergency drain hose is not

“Carrying out an Emergency

correctly sealed or is leaking.

Emptying Operation“). If the

emergency drain hose leaks

contact customer service.

RINSE HOLD has been se-

Cancel RINSE HOLD.

The washing machine

lected.

does not spin; there is

Soaking programme has fin-

Release SOAKING button

water in the drum.

(main wash programme will

ished.

follow).