JVC KD-LH3105 manual Activating the level meter, Standard, Meter

2)Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of –05 to +05.

3)Repeat steps 1) and 2) to adjust the other frequency bands.

5 Store the adjustment you made.

The confirmation message

appears—whether you want to

store the adjustment.

If you want to cancel the adjustments,

press EQ (equalizer).

•Adjustment you made remains effective until you select another sound mode.

6 Select one of the user sound modes (USER 1, USER 2, or USER 3) you want to store into.

Ex.: When you select “User 1”

1 Press EQ (equalizer) twice.

The last selected level meter appears on the display.

The next-step-operation button starts flashing.

2 Select the level meter pattern you want.

As you turn the control dial, the level meters

change as follows:

Off 1

3 2

Standard:

No level meter appears on the display. (Initially selected when shipped from the factory.)

Meter 1:

The audio level meter fluctuates vertically.

Meter 2:

The speaker on the display vibrates as input audio level changes.

ENGLISH

Activating the level meter

You can show the level meters on the display while playing any source. This unit is equipped with three level meter patterns.

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

Meter 3:

The left and right audio level meters appear.

•If the small animation display is selected, only one audio level meter can be shown.

31