Touch control panel | SPIN SPEED | |||
WASH CYCLE | SOFTENER | button | ||
button |
|
| ||
SELECTOR knob |
| DETERGENT | TEMPERATURE |
|
|
| button | button |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DISPLAY
START/PAUSE button
with indicator light | EN | ||
|
|
| |
ECO |
| WASH CYCLE | |
| |||
| PHASE icons | ||
indicator light |
| ||
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Button with ON/OFF |
|
|
| OPTION |
| DELAY |
DETERGENT |
| |||||
| buttons |
| ||||
|
| TIMER button | ||||
indicator light | DILUTION |
|
| |||
| button |
|
|
|
| |
|
|
| CHILD LOCK button |
LOCK |
|
| with indicator light |
|
| ||
indicator light |
| ||
Button with 
ON/OFF indicator light: press this briefly to switch the machine on or off. The green indicator light indicates that the machine is switched on. To switch off the washing machine during the wash cycle, press and hold the button for approximately 3 seconds; if the button is pressed briefly or accidentally the machine will not switch off. If the machine is switched off during a wash cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR knob: may be turned in either direction. To select the most suitable wash cycle, please refer to the “Table of wash cycles”.
The knob will not move during the wash cycle.
TEMPERATURE 
button: press to modify or exclude the temperature setting; the value selected will appear on the display above (see “Running a wash cycle”).
SPIN SPEED CYCLE 
button: press to modify or exclude the spin cycle; the value selected will appear on the display above (see “Running a wash cycle”).
DELAY TIMER 
button: press to set a delayed start for the selected wash cycle; the set delay time will appear on the display above (see “Running a wash cycle”).
OPTION buttons with indicator lights: press to select the available options. The indicator light corresponding to the selected option will remain lit (see “Running a wash cycle”).
DETERGENT and 
SOFTENER buttons : refer to “Modifying
DETERGENT DILUTION button: refer to “Filling the tanks” in the chapter “Auto Dose System”.
WASH CYCLE PHASE icons: these illuminate to indicate the progress of the wash cycle (Wash 
– Rinse 
– Spin 
–
Drain 
). The text 
lights up when the cycle is complete.
START/PAUSE button with indicator light: when the green indicator light flashes slowly, press the button to start a wash cycle. Once the cycle has begun the indicator light will remain lit in a fixed manner. To pause the wash cycle, press the button again; the indicator light will flash in an orange colour.
If the “LOCK” 
indicator light is switched off, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the button again.
LOCK 
indicator light: indicates that the porthole door is locked. To open the door, pause the wash cycle (see “Running a wash cycle”).
CHILD LOCK 
button with indicator light: to activate or deactivate the control panel lock, press and hold the button for approximately 2 seconds. when the indicator light is illuminated, the control panel is locked (apart from the ON/OFF button). This means it is possible to prevent wash cycles from being modified accidentally, especially where there are children in the home.
ECO indicator light: the 
icon lights up when, after altering the washing parameters, an energy saving of at least 10% is made. Furthermore, before the machine enters “Standby” mode, the icon will light up for a few seconds; when the machine is switched off the estimated energy saving will be around the 80% mark.
CHANGE LANGUAGE
The first time the machine is switched on, the first language will flash on the display. The
“
“, “OK” and “V” symbols will appear on the display, in line with the 3 buttons on the 
“ and “V” symbols. Use the “OK” button to confirm the language, which will be set after 2”. If no buttons are pressed, the automatic language change will begin again after 30”.
To change the language, switch the machine on and off again; in the 30” time period after it has been switched off, press and hold the temperature 
+spin +delayed 
start buttons simultaneously for 5’’. A short sound alert will be emitted and the set language will flash on the display. Press the buttons next to the “
“ and “V” symbols to change the language. Use the button next to the “OK” symbol to confirm the language, which will be set after 2”. If no buttons are pressed, the language set previously will be displayed after 30”. Switch on the machine.
7