Maytag Stacked Washer/Dryer Additional Information ODD Cycle Operation Lubrication, Finish

Page 14

ADDITIONAL INFORMATION

ODD CYCLE OPERATION

This Maytag stacked washer/dryer is manufac- tured for operation on 60 Hz approved electrical service. It is not designed for use on 50 Hz AC electrical service and conversion of the product from 60 to 50 cycle operation is not recom- mended. For additional information on 50 cycle products, write, MAYTAG INTERNATIONAL, INC., 8700 Bryn Mawr Ave., Chicago, Illinois 60631 or GRAY DISTRIBUTING CO., LTD., P.O. Box 2597, Honolulu, Hawaii 96803.

LUBRICATION

No routine lubrication is required to maintain the stacked washer/dryer. In the event something does need attention, contact an authorized Maytag dealer or servicer.

FINISH

All the cabinetry and external finishes are protected against rust to keep product looking well for many years. Cleaning and waxing will provide additional protection to these finishes.

The washer top has a porcelain finish. Since porcelain is “glass” bonded to metal, it is very durable. Avoid damage from sharp blows of objects or tools used around and in the appliance.

Clean the control panel with a soft damp cloth. Avoid abrasive cleaners that would scratch sur- face. A coat of household wax will reduce the chance of scratches on the control panel surface.

CAUTION: If “spilled” or used improperly, bleaches and other strong laundering chemicals can permanently spot or stain finishes unless wiped up immediately. Aerosol pretreated products can also damage finish on control panel. When using these products on garments placed in the stacked washer/dryer, it is advisable to avoid control panel area with the overspray.

WATER DAMAGE FROM

FLOODING

In the event the stacked washer/dryer is exposed to water from flooding, call your local Maytag dealer before using. Always unplug the appliance and have a qualified technician inspect the appliance before any attempt is made to operate the unit. Never wash product inside and out with a garden hose or pressure cleaning system.

REPLACEMENT PARTS

If your unit requires replacement parts, contact the dealer from whom you purchased your appliance, or Maytag Appliance Sales Co., Customer Service Division, Box 2370, Cleveland, Tennessee, 37320-2370, phone 1-800-688-9900, for information on the nearest Maytag part distributor.

Part and service manuals are available through your dealer or nearest parts distributor.

printed in U.S.A.

13

Image 14
Contents Canadian Models Important to InstallerModels Retain these instructions for future reference Important to OwnerUncrating Preinstallation Considerations Stacked Washer and DryerService Access Alcove or Closet InstallationMobile Home Installation MAKE-UP AIRLiquids or Materials Near a Dryer Direct ExhaustFlexible Ductwork Limitations Exhaust Hood TypeGrounding Instructions Rigid Ductwork LimitationsElectrical Requirements Grounding Instructions Additional Ground Procedure Where Local Code PermitsElectric Dryer Units Models Volt Operation Wire ReceptacleWire System Connections Water Supply and DrainInch standpipe recommended GAS ConnectionGAS Ignition Install Dryer Unit and Stand Dryer Installation Accessories Install Washer UnitDo not overtighten Washer Installation Accessory Kits Description ApplicationFinish Replacement PartsAdditional Information ODD Cycle Operation Lubrication Water Damage from Flooding