Maytag LAT8804, LAT8824 Operating Instructions, Select Options, Select Water Level, Temperature

OPERATING INSTRUCTIONS

Select Options

Extca Rinse

An additional deep rinse is automatically added to Regular Fabric loads by using the EXTRA RINSE option. Press the EXTRA RINSE switch to the "ON" position before the cycle begins. The washer will add a second rinse and spin to the cycle. The water tempera- ture will be the same as the initial rinse.

Wash/Spin Speed

By pressing the appropriate button, the wash and spin

speeds can be adjusted to fit the washing requirements of the load.

REGULAR/FAST -- Provides regular agitation speed and thst spin for sturdy fabric loads.

GENTLE/SLOW -- Provides a gentle agitation speed and slow spin for delicately constructed items and

sheer fabrics.

Select Water Level

Move the infinite slide lever up or dowaa to Extra Small, Small, IVledium, Large, Extra Large, or any point in between. If more water is needed once the fill is complete, move the lever all the way up to Beset, then move it to the desired setting.

For best washing results, clothes must circulate freely, If too little water is used, poor cleaning, linting and

excessix e wear may result. Use the following as a guide to select the proper water leveh

Fcatl_res llla_

Extra	Small	-	1/4	full of clothes.
Small	- i/4 to		i/3	full of clothes.
Medium-		i/8	to 1/2 full of clothes.
Large	- 1/2 to		3/4	full of clothes.
Extra	Large	-	3/4 to fifll of clothes.

NOTEg When laundering permanent press items or items of delicate construction, washable woolens or loosely knit items, never use less than the MEDIUM setting. This will minimize shrinkage, wrinkling and

pulling	Of seams.	"	'
'

Select Wash/Rinse Water

Temperature

Press the appropriate button to select the water ten> perature desired.

HOT/COLD - Wash water will be the temperature of the water coming from the hot water faucet. Rinse

water will be cold. Use this setting for heavily soiled whites and color-fast items.

WARM/WARM - Wash water will be a mixture of water coming from the hot and cold water faucets.

Rinse water will be the same, exeept when the perma- nent press cycle is selected; then it will automatically

be cold. Use this setting for delieates and for eel- ored items when a warm rinse following the wash is preferred.

WARM/COLD - Wash water will be a mixture of water coming from the hot and cold water ffaueets.

NOTE: If you experience problems selecting the correct water temperature, or cycle, or starting the washer, refer to page 8 for additional information before calling for service.

PAGE 4