Operating Sequence
WASHING
Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
1.Load the laundry
Open the door.
Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Close the door.
P0004
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment 
.
If you wish to carry out the prewash, pour detergent into the appropriate compartment marked 
.
3.Measure out the fabric softener
If required, pour fabric softener into the compartment marked 
, without exceeding the «MAX» mark.
4. Switch the machine on
Press the ON/OFF button to switch the machine on. The display will show three blinking dashes or a blinking zero. The light above the button will light up.
| / | O |
| 0 |
N | F |
| ||
O |
|
|
| |
|
|
| F |
|
5.Select the desired programme/ fabric
Press the FABRICS button repeatedly, in order to select the desired programme/fabric. The relevant light will light up.
The lights relevant to the phases that form the programme will light up.
The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The START/PAUSE button light will start flashing.
If the load of laundry to be washed is small, at the beginning of the cycle the display will still indicate the duration relevant to the maximum load. The duration value will be gradually adjusted during the execution of the cycle.
COTTONS
SYNTHETICS
DELICATES
WOOL
HAND
WASH
C0064 |
C0065 |
F | C | |
ABRI | S | |
| ||
Close the drawer gently.
11