Operating Sequence

Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.

Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

1. Load the laundry

Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

4. Switch the machine on

To switch the machine on, press the ON/OFF button: the mains-on light comes on.

ON / OFF

5. Select the required programme

Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on.

P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent required and pour it into the main wash compartment .

SPECIAL	O		COTTON
PROGRAMMES		95º
		95º	60ºE
			60º
			40ºE
			40º
			30º
WOOL30º			60º
40º			40ºE
30º 40º		30º	40º
DELICATES			SYNTHETICS

DOOR PREWASH

WASH

RINSES

DRAIN

SPIN

CLOGGED FILTER

END

If you have selected the PREWASH option or the SOAK programme, pour detergent into the compartment marked .

P0006

3.Measure out the fabric softener

If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer).

Close the drawer gently.

P0005

6.Select the SPIN speed or RINSE HOLD option

Depress the spin speed button to choose the required speed or RINSE HOLD option: the corresponding light comes on.

1200

900

700

500

RINSE

HOLD

SPIN