Zanussi ZJ 1217 manual Programme selector dial, Programme information

Page 8

11 Programme selector dial

The selector is divided into 5 sections:

Cotton,

Synthetics

Delicates

Wool (hand washing)

Special programmes

Reset programme O

SPECIAL

O

 

COTTON

PROGRAMMES

95º

 

 

60ºE

 

 

 

60º

 

 

 

40ºE

 

 

 

40º

 

 

 

30º

WOOL30º

 

 

60º

40º

 

 

40ºE

30º 40º

 

30º

40º

DELICATES

 

 

SYNTHETICS

The selector dial can be turned either clockwise or anticlockwise.

Position E corresponds to the ENERGY SAVING programme and position to “cold wash”.

At the end of the programme the selector dial must be turned to position O (reset).

Functions

End of programme

When the door locked light has gone out, the door can be opened. The END light on the programme progress display illuminates.

Turn the programme selector dial to O.

Switch the machine off and remove the laundry.

Altering a programme

You can alter the programme before it starts.

When the programme has started, you can only reset it by turning the programme selector dial to O and then you can select the new programme.

Start it by depressing the START/PAUSE button.

Interrupting a programme

Depress the START/PAUSE button to interrupt a programme which is running: the corresponding light starts to flash.

Depress the same button to restart the programme.

Cancelling a programme

Turn the selector dial to O to cancel a programme which is running. Now you can select a new programme.

Opening the door after the programme has started

You can open the door, after having set the washing machine to PAUSE, provided the following conditions exist:

the washing machine has not heated beyond 40°C;

the level of the water is not high;

the drum is not turning.

If these requirements are met, when you pause the washing machine, the DOOR light goes out and the door can be opened.

Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by pressing the ON/OFF button.

After approximately 3 minutes, you can open the door.

Pay attention to the level and temperatures of the water in the washing machine!

When you close the door and press the ON/OFF button again, the washing machine will resume the programme from the point where it had been interrupted.

Programme information

= Wool

Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the “hand washing” care symbol.

= Soak

Select this programme for heavily soiled laundry. Pour the detergent into the compartment . This programme is not suitable for wool.

The machine performs a soak at 30°C and stops with the water in the drum. The water can be emptied out by depressing the START/PAUSE button.

Important!

If the water is not emptied out within 18 hours, the machine empties automatically.

At the end of the soak (after having emptied out the water) you can select the washing programme. Turn first the programme selector dial to O, then select the programme and depress the START/PAUSE button.

8

Image 8
Contents Washing Machine Use InstallationChild Safety Contents Interest Environment Your New Washing MachineEcological hints Description of the Appliance Detergent dispenser drawerControl Panel Soil level BIO buttonSTART/PAUSE button Programme progress displayProgramme selector dial Programme information= Cancelling = Rinses= Softeners = DrainOperating Sequence At the end of the programme Select the required optionsStart the programme «JETSYSTEM» wash 1000g = 1 kgWhich detergent? Which form?Wash Care Symbols Important NotesWashing Programmes Special Programmes Additional Max ConsumptionProgramme Programme description Functions Load MinMaintenance and Cleaning Water inlet filter Cleaning the filterWater drain filter Something Not Working Service & Spare Parts Symptom Possible causes0870 5 Customer CareGuarantee Conditions Standard guarantee conditionsEuropean guarantee This guarantee does not cover03,# 940 Installation Instructions Technical SpecificationsUnpacking Positioning Water inletWater drainage Appliance must be connected to a cold water supplyInterest of the environment LevellingSpecial conditions Electrical connection Permanent connectionPreparation and assembly of the door Building-inDrill four fixing holes see Fig. G From the Electrolux Group. The world’s No choice