Zanussi ZJ 1217 Select the required options, Start the programme, At the end of the programme

Page 11

7. Select the required options

The light corresponding to the depressed button illuminates.

INTENSIVE

 

 

NORMAL

 

 

QUICK

 

 

EXTRA

SOIL

 

PREWASH RINSE

LEVEL

BIO

8. Start the programme

To start the selected programme, press the START/PAUSE button; the corresponding light stops flashing .

The pilot light corresponding to the wash phase which is running is on.

The machine starts operating.

START

PAUSE

9. At the end of the programme

The machine stops automatically.

If the RINSE HOLD option has been selected, the light of the START/PAUSE button flashes to indicate that the water must be emptied out before opening the door.

Release of the lock is indicated by the coming on of the END light and by the going out of the DOOR light.

Turn the programme selector dial to Reset O.

Switch the machine off by pressing the ON/OFF button.

Remove the laundry from the drum and carefully check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.

If you do not intend to carry out another wash, close the water tap.

Leave the door open to prevent the formation of mildew and unpleasant smells.

11

Image 11
Contents Washing Machine Use InstallationChild Safety Contents Interest Environment Your New Washing MachineEcological hints Detergent dispenser drawer Description of the ApplianceControl Panel Programme progress display Soil levelBIO button START/PAUSE buttonProgramme information Programme selector dial= Drain = Cancelling= Rinses = SoftenersOperating Sequence At the end of the programme Select the required optionsStart the programme 1000g = 1 kg «JETSYSTEM» washWhich form? Which detergent?Important Notes Wash Care SymbolsWashing Programmes Min Special ProgrammesAdditional Max Consumption Programme Programme description Functions LoadMaintenance and Cleaning Water inlet filter Cleaning the filterWater drain filter Something Not Working Customer Care Service & Spare PartsSymptom Possible causes 0870 5This guarantee does not cover Guarantee ConditionsStandard guarantee conditions European guarantee03,# 940 Technical Specifications Installation InstructionsUnpacking Appliance must be connected to a cold water supply PositioningWater inlet Water drainageInterest of the environment LevellingSpecial conditions Permanent connection Electrical connectionBuilding-in Preparation and assembly of the doorDrill four fixing holes see Fig. G From the Electrolux Group. The world’s No choice