The Control Panel
N/O | |
O | FF |
COTTONS | 90°C | 1200 | PREWASH |
SYNTHETICS | 60°C | 900 | AA40° |
DELICATES | 50°C | 700 | |
WOOL | 40°C | 500 |
|
| 30°C | RINSE | QUICK |
|
| HOLD |
|
|
| T |
|
| E |
|
|
|
|
|
|
|
| E |
|
|
|
|
| E | O |
| |
|
| M |
| R | S |
|
| S | |||
|
|
|
|
|
| ED |
| ||||
F | S |
| U |
| PI | P |
| PTION | |||
| PERAT |
|
|
| N S |
|
|
| |||
ABRIC |
|
|
|
|
|
|
|
|
|
| |
FJ 1254 W
|
| SKIP | |
|
|
| T |
ST | SE | SE | |
RE |
| ||
| ART/PAU |
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
1 ON/OFF button
Press this button to switch the washing machine on. Press the ON/OFF button again to switch the machine off.
2 MAINS-ON light
This light is connected to the ON/OFF button. It lights up when you press the button, and goes out when you press it again.
3 FABRICS button
Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5.
4 TEMPERATURE button
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine.The relevant light will light up. Maximum temperatures are 90°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics and wool.
IMPORTANT!
By pressing the TEMPERATURE and SPIN SPEED buttons simultaneously, the acoustic signal is deactivated at the end of the cycle, when selecting the programmes and in case of an incorrect option selection .
By pressing these 2 buttons again the acoustic signal is reactivated.
5 SPIN SPEED button
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up.
Maximum speeds are:
•for cotton: 1400, 1300, 1200 or 1000 rpm depending on the model;
•for synthetic fabrics and wool: 900 rpm;
•for delicate fabrics: 700 rpm.
RINSE HOLD position : when you choose this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry.
At the end of the cycle, the START/PAUSE button light will flash, to indicate that the water must be drained. To complete the cycle, choose one of the following options:
•Draining and spin:
-Press the START/PAUSE button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme.
-Select spin speed by means of button 5, and press the START/PAUSE button.
•Drain only
-Press the SKIP/RESET button once, so as to cause the DRAIN light 
to light up, then press the START/PAUSE button.
Important! If you accidentally press the SKIP/RESET button more than once the programme is cancelled., To drain the water, select any washing programme by means of the FABRIC button, then press SKIP/RESET three times in order to select the DRAIN position (only the DRAIN light will remain lit).
6