Selecting a special programme:
A wash programme must be selected in the normal way. (START button not pressed)
ST | S | |
| ART/PAU | E |
|
| |
To select Drain, press the SKIP button three times, the wash - rinses - spin LED,s go out.
PREWASH
WASH
RINSES
RINSE HOLD
SPIN
DRAIN
FILTER
END
A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s.
PREWASH
WASH
RINSES
RINSE HOLD
SPIN
DRAIN
FILTER
END
To select rinses & spin, press the SKIP button once, the wash LED goes out.
PREWASH
WASH
RINSES
RINSE HOLD
SPIN
DRAIN
FILTER
END
To select spin only, press the SKIP button twice. The wash & rinses LED,s go out.
PREWASH
WASH
RINSES
RINSE HOLD
SPIN
DRAIN
FILTER
END
If you wish to cancel or advance the running programme to the required phase, PAUSE the cycle and then press the SKIP button as previously described.
12 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
PREWASH
WASH
RINSES
RINSE HOLD
SPIN
DRAIN
FILTER
END
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
At the end of the programme the pilot light 
illuminates.
If the light 
lights up at the end of the programme this means that the drain filter is clogged.
In the event of operating problems the light of the START/PAUSE button 
and one of the following lights start to flash:
= the machine does not fill
= the machine does not empty
= the door has not been closed
To eliminate the problem, see paragraph “Something not working”.
8