USE OF YOUR APPLIANCE
The control panel
Never turn the programme selector when the appliance is working.
2 | 1 | 3 | 4 | 5 | 6 | 7 |
1. ON/OFF pushbutton "
"
Press the on/off pushbutton, the programme starts : the control lamp illuminates.
2. Control lamp
The control lamp illuminates when the appliance is working (on/off pushbutton "
" pressed). It extinguished when the on/off pushbutton "
" is pressed off.
3. Quick wash pushbutton "
"
This pushbutton allows to realize a quick wash on the cotton programme B and on the synthetics programme J.
4. Half load pushbutton "
"
This pushbutton allows to wash small quantity of linen not much soiled (2,5 kg) only on the cotton programmes.
5. Spinning speed variator
It enables to choose the spinning speed :
from 300 to 850 rpm (model T833 V) or from 300 to 750 rpm (model T 733 V) forthecotton, synthetics and wool programmes,
from 300 to 650 rpm for the delicate program- mes.
and the following options:
the draining position "
" in order to not spin the laundry at the end of the cycle,
the rinse hold position "
" so as to not drain the water of the last rinse so that not creased the laundry if this one is not immediately unloaded of the drum.
6. Programme selector
It enables to select the most adapted programme to the nature and degree of soil of your laundry. Turn the programme selector clockwise to select the chosen programme.
The programme selector indicates each pro- gramme phase as it takes place.
At the end of the programme, the appliance stops automatically on a stop position "I" for all the programmes or on a rinse hold position "I" if the rinse hold position "
" has been selected.
Never turn the programme selector anticlockwise.
7. Temperature selector
It enables to choose the most adapted temperature between cold (
) and 90°C.
Choose the temperature which corresponds to the chosen programme, with the help of the indica- tions or the programme table, according to the fibers and the fastness of the colours.
26