OPERATING INSTRUCTIONS
Before using your washing machine for the first time, we recommend that you do a preliminary wash with the machine empty, as a precaution to clean the drum, tank and the product box.
1.Pour a dose of detergent in the “washing” detergent dispenser.
2.Select the programme B 90°C.
3.Press the on/off pushbutton "
".
1. Place the laundry in the drum
Lift the lid.
Open the drum by pressing the release button A. The two flapdoors will open automatically.
Shake the laundry out loosely and place into the drum. Close the drum and shut the lid.
Be careful : before closing the lid of your machine, ensure that the drum door is correctly closed :
the two flapdoors are fastened,
the button A is released (in the raised position). An electronic system allows the drum to be in the high position when the cycle is finished. This system allows for easier loading and unloading of the laundry. If an unbalanced weight alters the functionning, turn the drum by hand.
A |
2. Measure out the detergent
Measure out the amount of detergent recommended by the manufacturer in the main wash compartment (
).
If you wish to carry out a prewash, pour the amount required into the prewash compartment (
).
3. Add the bleach agent, if required
Pour the bleach agent, if | Liquid detergent | Powder detergent | ||
required, into the | Compartment | |||
compartment marked |
|
| only compartment | |
| . However, ensure that | (prewash) | ||
| ||||
| ||||
the laundry withstands |
| the | treatment. Do not | |
|
| |||
exceed the MAX level. | Compartment | |
(wash) | ||
|
4. Add the fabric softener
Pour the softener, if required, into the compartment
marked 
. Do not exceed the MAX level.
Your washing machine has been designed in order to save water and detergent products. Please take care the filling level of the detergent products and do not exceed the MAX marks located near the display window of your detergent dispenser.
5. Press the quick wash pushbutton "
" and/or the half load pushbutton "
" if required.
27