Zanussi F1003 W manual Service & Spare Parts, 0870 5, Customer Care

Page 19

Symptom

Possible causes

 

 

 

The door will not open

The programme is still running.

 

The door lock has not yet released.

 

Water in the tub: the door cannot be opened if water is present in the

 

 

tub.

 

 

 

Spinning starts late or the machine

The electronic unbalance detection device has cut in because the

does not spin

 

laundry is not evenly distributed in the drum. The laundry is

 

 

redistributed by reverse rotation of the drum. This may happen several

 

 

times before the unbalance disappears and normal spinning can resume.

 

 

If, after 10 minutes, the laundry is still not evenly distributed in the

 

 

drum, the machine will not spin. In this case, redistribute the load

 

 

manually and reselect the spin programme.

 

 

 

The machine makes an unusual

The machine is fitted with a type of motor which makes an unusual

noise

 

noise compared with other traditional motors. This new motor ensures

 

 

a softer start and more even distribution of the laundry in the drum

 

 

when spinning, as well as increased stability of the machine.

 

 

 

No water is visible in the drum

Machines based on modern technology operate very economically

 

 

using very little water without affecting performance.

 

 

 

Service & Spare Parts

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:

0870 5 929929

Your telephone call will be automatically routed to the Service Force Centre covering your post code area.

For the address of your local Zanussi Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk.

Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working”.

When you contact the Service Force Centre you will need to give the following details:

1.Your name, address and post code

2.Your telephone number

3.Clear and concise details of fault

4.The model and serial number of the appliance (found on the rating plate - see picture).

5.The purchase date

Customer Care

For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, please contact our Customer Care Department by letter or telephone as follows:

Customer Care Department Zanussi

55-77 High Street Slough Berkshire

SL1 1DZ

Tel 08705 727727*

or visit our website at www.zanussi.co.uk

*calls to this number may be recorded for training purposes.

 

Mod

 

Prod. No

P0042

Ser. No

 

19

Image 19
Contents Washing Machine Child Safety InstallationUse Contents Ecological hints Your New Washing MachineInterest Environment Detergent dispenser drawer Description of the ApplianceControl Panel Operating Sequence At the end of the programme Start the machineWashing 2 KG of Mixed Fabrics AT 50C At the end of the programme 1000g = 1 kg Washing HintsWhich form? Which detergent?Important Notes Wash Care SymbolsType of laundry Washing ProgrammesProgrammes for synthetics, mixed fabrics, delicates and wool Maintenance and Cleaning Emergency emptying out Cleaning the water inlet filtersSomething Not Working 0870 5 Service & Spare PartsCustomer Care Exclusions Guarantee ConditionsStandard guarantee conditions European guaranteeTechnical Specifications Installation InstructionsUnpacking Positioning Water inletWater drainage Special conditions LevellingInterest of the environment Permanent connection Electrical connectionsPage From the Electrolux Group. The world’s No choice