Zanussi F1003 W manual Unpacking

Page 22

Unpacking

All transit bolts and packing must be removed before using the appliance

You are advised to keep all the packaging for re-use in case the appliance has to be transported again.

■Unscrew and remove the three rear transit bolts (using a spanner).

■Lay the machine gently on its back, making sure that the hoses are not squashed.

We suggest a polystyrene angle bracket from the packing is placed on the floor before tilting it back to avoid the hoses being spacers.

■Carefully remove the polyethylene bags located at the base of the machine by pulling them toward the centre of the machine.

■Place the machine in an upright position and remove the three plastic spacers.

P0287

P0018

1 2

AL009

P0001

■Plug the 3 holes with the plastic plugs which you

can find in the envelope containing the instruction booklet.

P0002

22

Image 22

Contents Washing Machine Child Safety InstallationUse Contents Ecological hints Your New Washing MachineInterest Environment Description of the Appliance Detergent dispenser drawerControl Panel Operating Sequence Start the machine At the end of the programmeWashing 2 KG of Mixed Fabrics AT 50C At the end of the programme Washing Hints 1000g = 1 kgWhich detergent? Which form?Wash Care Symbols Important NotesWashing Programmes Type of laundryProgrammes for synthetics, mixed fabrics, delicates and wool Maintenance and Cleaning Cleaning the water inlet filters Emergency emptying outSomething Not Working 0870 5 Service & Spare PartsCustomer Care European guarantee Guarantee ConditionsStandard guarantee conditions ExclusionsInstallation Instructions Technical SpecificationsUnpacking Water inlet PositioningWater drainage Special conditions LevellingInterest of the environment Electrical connections Permanent connectionPage From the Electrolux Group. The world’s No choice