132985450.qxd 18/07/2005 17:47 Pagina 8
Duration of the selected programme After selecting a programme, the duration is displayed in hours and minutes ( for example 2.05).
2.05
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
After the programme has started, the time remaining is updated every minute.
Delayed start
The selected delay (23 hours max) set by means of the relevant button appears on the display for 3 seconds, then the duration of the previously selected programme is displayed.
The countdown is updated every hour and, when remain the last 2 hours, each 30 min.
DELAY
START
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for 2 seconds.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
E20
End of programme
When the programme has finished a flashing zero is displayed. The door can be opened when the 
(DOOR) pilot light has gone out and if the 
(RINSE HOLD) option has not been selected.
0
13 Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.
After the machine has started, the 
(DOOR) pilot light and only the running phase light illuminate and stay on.
When the programme has finished, the 
(END) pilot light comes on and the the 
(DOOR)
pilot light goes off.
DOOR
PREWASH
WASH
RINSES
DRAIN
SPIN
CLOGGED
FILTER
END
8