Zanussi Washer/Dryer user manual Rear bracket is positioned against the ma- chines back fig

If the side is as shown in fig. 2, you must pick the rear brackets as in fig. 4.

If, the side is as shown in fig. 3, you must pick the rear brackets as in fig. 5.

fig. 6 fig. 7

Now you can proceed to fit one of the rear brackets to the left side of the stands back using the screws sup- plied (fig. 6 and 7).

Lay gently the washing machine on the detergent compartment side (fig. 8).

fig. 8

x5

fig. 9 fig. 10

Loosen the washing machines adjusting feet using the key supplied with your washing machine, then undo 5 complete turns (fig. 9 and 10).

Important! If the feet are already partly undone, you must first screw them on again and then undo 5 com- plete turns.

fig. 11 fig. 12

Slide the stand under the washing machine so that its front adjusting feet match the stands front brackets (fig.

11)and the rear bracket is positioned against the ma- chines back (fig. 12).

Screw the rear bracket on- to the machines back us- ing one of the supplied screws (fig. 13).

fig. 13

fig. 14 fig. 15

Return machine and stand to a vertical position, and screw the other bracket onto the stand and the machines back using the remaining supplied screws (fig. 14 and 15).

fig. 16 fig. 17

3