Operating Sequence
Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the main wash compartment 
of the dispenser drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of normally soiled laundry to wash. It is white cotton and is suitable for high temperature washing.
1. Load the laundry
Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour it into the main wash compartment 
.
If you wish to carry out the prewash, pour detergent into the compartment marked 
.
C0064 |
3.Measure out the fabric softener
If required, pour fabric softener into the compartment marked 
(the amount used must not exceed the “MAX” mark in the drawer).
Close the drawer gently.
C0065 |
4.Select the spin speed or option
or 
Turn the dial to the required position.
450 |
|
|
| 1000 |
550 |
|
|
| |
|
|
|
| |
|
|
| 00 | 9 |
| 650 |
|
| |
|
| 800 |
| |
|
| 700 |
| |
|
|
|
|
5. Select the required programme
Turn the programme selector dial clockwise to the programme B or A (if you wish to perform a prewash).
B |
P1006S |
7