Something not working?
If a problem occurs, you can try to solve it yourself following the instructions below. If you call out an engineer when one of the following problems occurs, or to repair a fault due to incorrect use, the callout will be charged even if requested within the guarantee period.
Problem | Possible cause | Solution | |
|
|
| |
| • Mains plug disconnect- | Plug in mains plug | |
| ed | ||
|
| ||
| • The START button has | • Press START button | |
| not been depressed. | ||
|
| ||
The drier is not | • No programme selected | • Select programme | |
working |
|
| |
properly | • Loading door open | • Close loading door | |
| • Fuse or residual current | • Check fuse or residual | |
| current circuit breaker. | ||
| circuit breaker in fuse | ||
| Faults can be eliminat- | ||
| box (domestic installa- | ||
| ed by an electrical engi- | ||
| tion) faulty | ||
| neer | ||
|
| ||
| • Wrong programme | • Select another (time) | |
| programme for the next | ||
| selected | ||
| drying cycle | ||
|
| ||
| • Filter blocked | • Clean filter | |
The drying results are | • Wrong filling quantity | • Observe recommended | |
not satisfactory | |||
filling quantity | |||
|
| ||
| • Laundry not sufficiently | • | |
| dried | ciently | |
| • Deposit on the drum | • Clean drum inner sur- | |
| inner surfaceor on the | ||
| face and drum ribs | ||
| drum ribs | ||
|
| ||
|
|
| |
The drying cycle | • Vented air transport dis- | • Straighten N- air vent- | |
ing hose and/or clean | |||
rupted | |||
exceptionally takes a | air venting ducts | ||
| |||
long time | • Lint filter blocked | • Clean lint filter | |
| |||
|
|
|
12