Zanussi ZDE 47100W user manual Technical data, Installation, Appliance positioning

Technical data

Height x width x depth	85 x 60 x 58 cm
Drum volume	108 l
Depth with loading door open	109 cm
Height can be adjusted by	1.5 cm
Weight when empty	approx. 32.5kg
Loading volume (depends on programme)1)	max. 7 kg
Voltage	230-240 V
Required fuse	13 A
Total power	2200 W
Energy efficiency class	C
Energy consumption (7 kg of cotton, pre-drained at 1000	3.9 kWh
rpm) 2)
Average annual energy consumption	262.6kWh
Use	Domestic
Permissible ambient temperature	+ 5°C to + 35°C

Consumption values

The consumption values have been established under standard conditions. They may deviate when the machine is

operated in domestic circumstances.

Programme	Energy consumption in kWh / average drying time in min.
COTTON CUPBOARD 2)	3.9 / 115	(7kg load pre-drained at 1000 rpm)
COTTON IRON2)	3 / 85 (7 kg load pre-drained at 1000 rpm)
SYNTHETICS CUPBOARD 2)	1.18 / 35	(3 kg load pre-drained at 1200 rpm)

1)Different loading volume data may be needed in some countries as a result of different measuring methods.

2)in accordance with EN 61121

Installation

Appliance positioning

•It is recommended that, for your convenience, the ma- chine is positioned close to your washing machine.

•The tumble dryer must be installed in a clean place, where dirt does not build up.

•Air must be able to circulate freely all round the appli- ance. Do not obstruct the front ventilation grille or the air intake grilles at the back of the machine.

•To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.

•Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is.

•The feet must never be removed. Do not restrict the floor clearance through deeppile carpets, strips of wood or similar. This might cause heat built-up which would interfere with the operation of the appliance.

11