Zanussi ZDE 47100W user manual Cleaning and maintenance

Page 8

Selecting the programme

Use the programme selector to set the programme you require.

Selecting additional functions

You can choose from the additional functions (only with time programmes ) :

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

5

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

button 1 -DELICATE button 2 -TEXTILE

DELICATE

Pressing this button allows drying to be performed at a lower temperature, for delicate items. The corresponding pilot light comes on. This option can also be used for time controlled drying.

TEXTILE

Press the Textile button repeatedly, to select the desired option. The relevant light will light up. You can select 2 different options: COTTON cycle: to be used for cotton, and SYNTHETICS : to be used for synthetic or delicate items.

Starting the programme

Press the START PAUSE button. The programme is star- ted.

Cleaning and maintenance

The programme phase is shown by appropriate lights; light 5- DRYING , light 6- COOLING, light7- END/ANTI-

CREASE .

Changing programme

To change a programme which has been selected by mis- take once the programme has started, first turn the pro- gramme selector to OFF position. The programme is cancelled.

The programme can no longer be changed directly once the programme has started. If nevertheless

there is an attempt to change the programme on the pro- gramme knob or if an function button is pressed, led START PAUSE starts flashing temporarily in yellow. The drying programme is not however affected by this (laundry protection).

Drying cycle complete / removing laundry

Once the drying cycle is complete, the lights END/ANTI- CREASE and FILTER (light 4) are on. If the buzzer function is active, an acoustic signal will sounds intermittently for about one minute.

The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes.

The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. The laundry can be removed at any time during the anti-crease phase. (The laundry should be taken out towards the end of the anti- crease phase at the latest to prevent creases from form- ing.)

1.Open door.

2.Remove laundry.

3.Remove filter after clothes has been removed. Clean the filter.

Warning! Before You place the filter, please check it there is nothing inside the filter seat.

4. Turn the programme selector to OFF .

Important! Clean the filter after each drying cycle.

5. Close the door.

Warning! The tumble dryer is not to be used if industrial chemicals have been used for cleaning!

8

Image 8
Contents Tumble Dryer ZDE 47100W Contents Important safety informationUse InstallationChild safety Product description Control PanelLaundry weights Before first useSorting and preparing laundry Sorting laundryProgramme chart ProgrammesDoor opening and laundry loading Switching machine onDaily use Cleaning and maintenance Cleaning fluff filter Cleaning the doorCleaning the drum Clean operating screen and housingMachine settings Buzzer Signal permanent on/offAppliance positioning Technical dataInstallation Removing transport safety packaging Fitting the vent hoseDoor reversal Special accessoriesElectrical connection Service EnvironmentPackaging material Environmental tipsPage 136909160-01-02022009