Haier SIG100-97 manual After washing, Cleaning the lint filter

Page 17

After washing

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.

Please first pull off the power plug from the receptacle before cleaning.

Cleaning the lint filter

The lint filter must be used during washing.

It must be cleaned in time after each using

1.Take off the lint filter

 

 

Pull up the lint filter on the agitator

 

Press

to remove. As shown in Figure 1.

Press

2.Removing lint

 

 

Press the lint screen clip with your

 

Figure 2

thumb and index finger, and get the

 

 

 

screen downward as shown in Figure

 

 

2. While wet, remove the lint on the

 

 

screen in water.

 

 

3.Mounting the lint filter

 

 

After cleaning, mount the screen back

 

 

onto the lint filter as shown in Figure 3.

 

 

Then put the lint filter back in the agitator

Lint Screen

barrel.

 

 

Figure 3

Lint filter

Pull up out

Agitator

Figure

The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months.

If the cabinet is dirty, wipe it with wet cloth

Do not flush it directly with water.

Wipe it with neutral detergent.

Do not wipe it with thinner, petrol, alcohol etc.

Petro

l

Thinner

 

Alcohol

 

 

 

 

1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the water completely after

each using.

3.Be sure to pull off the power plug before maintenance. 4.Hang up the power cord and drain hose.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.

15

Image 17
Contents SIG100-97 Contents Names of the parts Accessories Meaning and description of the symbolsEarth Safety precautionsPetrol Adjust the installation position Installation and adjustmentInstall the water inlet hose Pay attention to followings before washing the laundries Preparation before washingPut in the laundries Usage of the Operation Buttons Explanation of Buttons Indicator mode and meaningNumeral tube s window Buttons initial status for Normal program Press Power On/Off to switch on the power supply On/OffButtons, status for different program selected Press the button of cycles to select a suitableFull-automatic program Water level Press the button of Load Size to select a suitablePress the button of Speed to select suitable wash Spin speedsPress the Start/Pause button Press the button of Delay/Start to select a suitable DelayClose the top lid After washing Cleaning the lint filterTrouble shooting answer to question Packing list Specification