Haier SIG100-97 manual Safety precautions, Earth

Page 4

Safety precautions

Please insert the power cord into special three The power cord plug should be convenient -phase receptacle.The earthing terminal of the to be pluged in or pluged out with hand receptacle must be earthed reliably.If possible ,while the washing machine runs normally.

please adopt electric leakage protector. Be sure to pull the plug out and close the water tap when the machine is idle,when moving the machine,or when cleaning the machine.Do not use wet hand to ins- ert or pull out the power plug.

Earth

Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.

Keep the pin of the power plug clean,if the power plug is polluted with dust,please wipe with dry cloth carefully.

If the power cord or the power plug is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department.

Do not put the machine at damp place like the bath

Do not use water hotter than 60

room. Never wash it with water.Not put wet laundries

 

on the control panel.

 

In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole with carpet.

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning.

2

Image 4
Contents SIG100-97 Contents Accessories Meaning and description of the symbols Names of the partsSafety precautions EarthPetrol Installation and adjustment Adjust the installation positionInstall the water inlet hose Preparation before washing Pay attention to followings before washing the laundriesPut in the laundries Indicator mode and meaning Usage of the Operation Buttons Explanation of ButtonsNumeral tube s window Press Power On/Off to switch on the power supply On/Off Buttons initial status for Normal programFull-automatic program Press the button of cycles to select a suitableButtons, status for different program selected Press the button of Load Size to select a suitable Water levelPress the button of Speed to select suitable wash Spin speedsPress the button of Delay/Start to select a suitable Delay Press the Start/Pause buttonClose the top lid Cleaning the lint filter After washingTrouble shooting answer to question Packing list Specification