Schneider Electric PWRSRV750 APPENDIX G-POWERLOGIC SYSTEM DISPLAY SD700 INSTALLATION, Danger

Models: PWRSRV750 PWRSRV710

1 68
Download 68 pages 63.84 Kb
Page 57
Image 57
APPENDIX G—POWERLOGIC SYSTEM DISPLAY (SD700) INSTALLATION

63230-216-207/A3

 

Appendix G—POWERLOGIC System Display (SD700) Installation

9/2002

 

Product Description

 

APPENDIX G—POWERLOGIC SYSTEM DISPLAY (SD700) INSTALLATION

PRODUCT DESCRIPTION

The System Display is a full-color, panel-mount touch screen display

 

designed to be mounted on power equipment. The system display lets you

 

view the Power Server screens locally at the equipment. Water and dust

 

protection to NEMA 4 and 12 standards allow the system display to be used

 

in a wide variety of industrial and commercial applications. A bright LCD

 

display with 800 X 600 pixel resolution and a wide viewing angle ensure that

 

data is visible in a broad range of lighting conditions. For complete

 

specifications, see the user’s guide shipped with the display.

INSTALLATION AND OPERATION

Refer to the user’s guide shipped with the display for information on:

 

Installing the display

 

Connecting control power

 

Auto-adjusting the touchscreen

 

• Understanding the front panel LED indicators

SAFETY PRECAUTIONS

PRODUCT DESCRIPTION DANGER

HAZARD OF ELECTRIC SHOCK, BURN, OR EXPLOSION

This equipment must be installed and serviced only by qualified personnel.

Turn off all power supplying this equipment and the equipment it is mounted in before working on or inside equipment.

Always use a properly rated voltage sensing device to confirm that power is off.

Replace all device doors and covers before turning on power to this equipment.

Failure to observe these instructions will result in death or serious injury.

CONNECTING TO THE POWER SERVER To connect the touch screen display to the Power Server, do the following:

1.Turn off all power supplying the electrical equipment in which the display and power server are installed, and confirm that power is off using a properly rated voltage sensing device.

2.Locate the serial cable supplied with the system display. The serial cable has a male nine-pin connector on one end and a female nine-pin connector on the other end.

© 2002 Schneider Electric All Rights Reserved

53

Page 57
Image 57
Schneider Electric PWRSRV750 APPENDIX G-POWERLOGIC SYSTEM DISPLAY SD700 INSTALLATION, Product Description, Danger