Manuals / Schneider Electric / Computer Equipment / Server

Schneider Electric PWRSRV750 Appendix C-Using A Crossover Cable To Configure The Power Server

Models: PWRSRV750 PWRSRV710

1 68

Download 68 pages 63.84 Kb

Page 37

APPENDIX C—USING A CROSSOVER CABLE TO CONFIGURE THE POWER SERVER

63230-216-207/A3	Appendix C—Using a Crossover Cable to Configure the Power Server
9/2002

APPENDIX C—USING A CROSSOVER CABLE TO CONFIGURE THE POWER SERVER

If you choose to use a cross-over cable to configure the Power Server, follow these steps:

1.Connect the cross-over cable from the Ethernet UTP port on the Power Server to your PC as illustrated in Figure C–1.

Ethernet UTP port

30703006	Cross-over cable	30703012

Figure C–1: Cross-over connection for Power Server configuration

2.Connect the power supply and ground if you have not already done so. For instructions, refer to the section “Control Power” on page 10.

3.From your PC’s taskbar, click Start > Settings > Network and Dial-up Connections.

The Network and Dial-up Connections screen displays.

NOTE: An example using Microsoft Windows® 2000 is shown in the following steps. For help with other systems, contact your network administrator.

4.From the Network and Dial-up Connections screen, click the Local Area connection icon.

The Local Area Connection Status dialog box displays.

© 2002 Schneider Electric All Rights Reserved

33

Image 37

Schneider Electric PWRSRV750, PWRSRV710 setup guide Appendix C-Using A Crossover Cable To Configure The Power Server

Contents

POWERLOGIC Power Server 63230-216-207/A3 9/2002PWRSRV710 and PWRSRV750 Models Setup Guide Retain for future use Instruction BulletinPLEASE NOTE CLASS A FCC STATEMENT DANGERCHAPTER 2-SAFETY PRECAUTIONS CONTENTSCHAPTER 3-INSTALLATION CHAPTER 5-SETUPAPPENDIX G-POWERLOGIC SYSTEM DISPLAY SD700 INSTALLATION APPENDIX F-CONNECTING THIRD PARTY DEVICES TO THE POWER SERVERAPPENDIX H-DATABASE BACKUP INDEXCHAPTER 1-INTRODUCTION Figure 1-1 Power ServerOVERVIEW touch screen NOTE The shaded area depicts a POWERLOGIC Enterprise System. ContactSystem Manager HAZARD OF ELECTRIC SHOCK, BURN, OR EXPLOSION CHAPTER 2-SAFETY PRECAUTIONSDANGER 63230-216-207/A3 Chapter 2-Safety Precautions9/2002 2002 Schneider Electric All Rights ReservedDIMENSIONS CHAPTER 3-INSTALLATIONFigure 3-1 Power Server dimensional drawing Figure 3-2 Power Server rear view showing DIN rail connectionTo mount the Power Server on a DIN rail, follow these steps Figure 3-3 Proper orientation of Power Server and power supplyDANGER HAZARD OF ELECTRIC SHOCK, BURN, OR EXPLOSIONFigure 3-4 Power Supply PS080 mounting 63230-216-207/A3 Chapter 3-InstallationMounting 9/2002CHAPTER 4-CONNECTIONS Figure 4-1 Power Server connectionsCONNECTIONS SUMMARY Table 4-1 Connections descriptionNOTE Check for proper polarity before applying power to the unit CONTROL POWERFusing NOTE The control power source must be properly groundedControl Power Figure 4-3 Power Server grounding to local equipmentPower Server + 24 Vdc + Power Supply PS080 L N 100-240 Vac SourceRS-232 SERIAL PORTS Power Server Communication Connection” on page 17 for completeFigure 4-4 COM 1 and COM 2 ports Table 4-2 Default Values for RS-485 Ports Table 4-2 shows the default values for each of the RS-485 portsFigure 4-5 Male DB-9 connector master port Figure 4-6 Typical POWERLOGIC standard device connection toEach RS-485 port has built-in communications signal biasing and CONNECTING 4-WIRE DEVICES AS 2-WIREBiasing and Termination instruction bulletin for the last device on the daisy chainTable 4-3 Daisy Chain Maximum Distances 4-Wire COMMUNICATIONS WIRINGTable 4-4 Daisy Chain Maximum Distances 2-Wire Baud RateChapter 4-Connections Communications Wiring63230-216-207/A3 9/2002SUMMARY OF SETUP STEPS CHAPTER 5-SETUPConfigure the PowerLogic System application using NetMeeting Using a Null Modem Serial Cable to Configure4. Enter a name for your setup connection and select OK 9. At the C\ prompt, enter nwsetup Table 1 Power Server Setup-HyperTerminal OptionsThe PowerLogic Network Setup Application displays in HyperTerminal 10. Set all of the network setup options as described in TableUsing a Crossover Cable to Configure the Power Server on page 33 for CONNECTING TO THE POWER SERVER WITH NETMEETINGFigure 5-2 Power Sever remote or local connections for setup Chapter 5-SetupCommunications Netmeeting Windows 2000 path Starting NetMeetingSecurity and check “I prefer to make secure outgoing calls” and click Chapter 5-Setup4. For User, enter PowerServerAdmin 1. Use NetMeeting to access the Power Server CONFIGURING THE POWER SERVERThe Power Server splash screen displays Chapter 5-SetupFigure 5-3 Power Server Desktop Setting the Date/Time and Time Zone HAZARD OF SYSTEM MALFUNCTION defined in the system. Do not delete these settings or define a new Configuring Your POWERLOGIC SystemNOTE If you need help configuring the PowerLogic system, refer to the online help file “Quick Starts” listed in the help contents. From the1. Return the Power Server back to run mode click the red Power Server Table A-1 Power Server Specifications APPENDIX A-SPECIFICATIONSTable A-2 PS080 Specifications CONTROL POWER INPUT SPECIFICATIONS63230-216-207/A3 Appendix A-Specifications9/2002 2002 Schneider Electric All Rights ReservedAppendix B-Changing Your Password APPENDIX B-CHANGING YOUR PASSWORDThe User Properties dialog displays Figure C-1 Cross-over connection for Power Server configuration APPENDIX C-USING A CROSSOVER CABLE TO CONFIGURE THE POWER SERVERThe Internet Protocol TCP/IP Properties dialog box displays Assigned IP Address Place a Call button The Remote Desktop Sharing dialog displays 10.10.10.1015. Double click the Network Setup icon Table C-1 Power Server Setup-HyperTerminal Optionsdesktop 17. Follow the onscreen instructions to change the value18. After changing the options, verify that all settings are correct APPENDIX D-INTEGRATING THE POWER SERVER INTO SMS 63230-216-207/A3 Appendix D-Integrating the Power Server into SMS9/2002 2002 Schneider Electric All Rights ReservedABOUT THE SOFTWARE WARRANTY APPENDIX E-UPLOADING AND DELETING FILES ON THE POWER SERVERUPLOADING FILES TO THE POWER SERVER 4. Wait for the Add Files icon to become enabled, then click it Appendix E-Uploading And Deleting Files On the Power Server Uploading Files to the Power Server6. Click the Send All icon 63230-216-207/A3The following screen displays to display the DELETING FILES ON THE POWER SERVERDeleting Files on the Power Server Appendix E-Uploading And Deleting Files On the Power Server63230-216-207/A3 9/2002APPENDIX F-CONNECTING THIRD PARTY DEVICES TO THE POWER SERVER 5. Click the Transfer Files icon 6. Click Add Files Appendix F-Connecting Third Party Devices to the Power Server63230-216-207/A3 9/20028. Click Send All 9. When all files have transferred, close the File Transfer dialog10. Click the “Target’s Desktop” window 63230-216-207/A3Page 17. Follow the onscreen instructions in the wizard 16. Double-click Setup.exe63230-216-207/A3 9/200219. Click Finish INSTALLATION AND OPERATION APPENDIX G-POWERLOGIC SYSTEM DISPLAY SD700 INSTALLATIONSAFETY PRECAUTIONS PRODUCT DESCRIPTIONFigure G-2 Power Server connectors CARE AND CLEANINGCALIBRATING THE TOUCH SCREEN Specifications SPECIFICATIONSTable G-1 DisplaySpecifications Appendix G-POWERLOGIC System Display SD700 Installation63230-216-207/A3 9/2002BACKING UP THE DATABASE ON THE POWER SERVER APPENDIX H-DATABASE BACKUPrefresh the page, click Database Statistics in the list again Checking the Database Backup StatusBacking Up the Power Server Database onto a Separate PC BACKING UP THE POWER SERVER DATABASE ONTO A SEPARATE PCAppendix H-Database Backup RESTORING THE DATABASE ON THE POWER SERVERRestoring the Database on the Power Server 63230-216-207/A3INDEXNumerics Page Page POWERLOGIC Power Server Setup Guide