Haier SIG100-97 manual Preparation before washing

Page 8

Preparation before washing

Preparation before washing

1.Connect the water inlet hose. Open the water faucet.

2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline.

3.Put the drain hose up.

1.0m~1.5m

Pay attention to followings before washing the laundries

Confirm if

Clear the pocket.

Fasten the

there's special

Take out the

buttons and

requirment for

coins , sand,

zippers.

the laundries.

hairpins etc.

 

 

 

 

 

 

 

The big laundries like the jeans shall be put in loosely.

When the pulsator is running , the buttons of the l a u n d r i e s m a y

cause

noise.

For

t h e

s a k e

o f

carefulness,please put the laundries with buttons into other laundries.

a.Please check if the laundries are applicable for washing. b.Separate those not colorfast from other laundries.

c.For laundries not water absorbing,please put them into water with hands.

d.For laundries with much soil,please remove the soil first.You can add detergent on the part with serious soil directly.It is much easier to remove the soil by that mean.

e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before putting them into the water.

f.Do not put the laundries polluted with chemicals directly into the washing machine.

6

Image 8
Contents SIG100-97 Contents Accessories Meaning and description of the symbols Names of the partsSafety precautions EarthPetrol Installation and adjustment Adjust the installation positionInstall the water inlet hose Preparation before washing Pay attention to followings before washing the laundriesPut in the laundries Indicator mode and meaning Usage of the Operation Buttons Explanation of ButtonsNumeral tube s window Press Power On/Off to switch on the power supply On/Off Buttons initial status for Normal programButtons, status for different program selected Press the button of cycles to select a suitableFull-automatic program Press the button of Load Size to select a suitable Water levelPress the button of Speed to select suitable wash Spin speedsPress the button of Delay/Start to select a suitable Delay Press the Start/Pause buttonClose the top lid Cleaning the lint filter After washingTrouble shooting answer to question Packing list Specification