Haier HWMP65-918 user manual Maintenance

Page 16

Maintenance

Remove the power plug before carrying out any cleaning or maintenance.

Clean the lint filter(s) and detergent box after each wash.

Remove and clean the detergent box, replace after cleaning.

DismantleInstall

The filter at the water inlet valve may become blocked by impurities in the water supply. Clean it with a plastic bristled brush every two months.

The lint filter must be used during washing.

It must be cleaned after each use Lint filter:

1.Slide upwards to remove.

2.Gently push it down to install; ensuring it is in place before

next wash.

Directions for cleaning lint filter on model HWMP55-918

remove Install

Directions for cleaning lint filter on model HWMP65-918

Dismantle

Dismantle

Install

Install

 

 

The front cover of lint filter

If the cabinet is dirty, wipe it with a damp cloth.

Do not wash directly with water.

Wipe with a neutral detergent (please check directions on detergent bottle first).

Do not wipe machine with thinners, petrol, alcohol or other harsh solvents.

P

et

ro

l

Thin

ner

 

 

 

 

 

 

 

Alcohol

1.After washing cycle has finshed, turn off the water faucet. (If needed, you can remove the water inlet hose).

2.Do not store water in the washing machine for a long period without completing a wash cycle. Drain the water completely after each wash.

3.Hang up the power cord and drain hose.

4.Wipe up any drops of water on the surface of the machine and inside the tub. Leave the lid open for about 1 hour after each wash to evaporate any residual water.

14

Image 16
Contents This manual is for HWMP55-918 HWMP65-918 Contents Description of symbols Power cordProduct Overview DrainageSafety Precautions Or cause an electrical faultSafety precautions Installation & Adjustment Install the lint filterInstall the bottom plate Balance washing machineInstall drainage hose Installation of drainage hosePlacement of Drainage Hose Check the inlet hose connections Installation of water inlet hosesRemoving the water inlet hoses Before washing PreparationLoad the laundry Detergent Usage GuideClose the lid Adding washing powderIndicator display Operation & Wash CyclesRemaining time display Cycle ButtonDelay button Delay start can be set for 2-24hr operationWash Rinse Spin button Water Level buttonButton Operation and Descriptions Press Button to switch power on/offPress the Cycle button to select automatic program Button to select the delay wash program PressCycle completed ˜ÑNoteMaintenance Trouble-shooting Common occurrences SituationName Packing listQuantity Storage position Specifications