Disposal after washing
Please first pull off the power plug from the receptacle before cleaning.
After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine.
Clean the detergent box and set it onthe control panel seat.
1The method of dismantle: Push it up aslant and gently.
2The method of install : install it upwards and aslant and push it in.
Cleaning the lint filter
1
3
Push down the spring piece of the top lint filter to make the claws out of the filter cover, and then pull out the lint filter to get it down.
Put the lint filter into filter cover, and make it tight .
2
4
Notes:
Pull the back of the lint filter, and then you can get down it off the front cover of the lint filter.
Sweep the rubbish in the lint filter.
Put the back of the lint filter into the front cover .
Make sure the lint filter well installed, or it can influence your use.
The filter screen of the water inlet valve is likely to be blocked by foreign materials and
influence the water inlet. Please clean it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc. After washing, close the water faucet.
( If needed, you can dismantle the water inlet hose).
Do not store water in the washing machine for a long period. Drain the water completely after each using.
Be sure to pull off the power plug before maintenance.
Hang up the power cord.
Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time ( about 1 hour), then close the top lid.
13