Washing sequence

Wash selector

(standard current, gentle current)

(To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer).

Water-filling selector handle

1.Water-filling selector

(1)Set the water-filling selector at the "WASH" side. (Figure 1)

(2)Set the water level adjusting lever to needed line.

2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)

Run washing program for some time to stir and dissolve the powder completely.

WASH SPIN

Figure 1

Figure 2

3.Put in the laundries. If the water quantity is insufficient, please add water.

4.Select the current.

Select the strength of the current according to the laundries. (Figure 3)

5.Select the washing time

Select the washing time according to the laundries. (Figure 4)

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

OFF

WASH TIMER

STANDARD

GENTLE

Figure 4

DRAIN

WASH SELECTOR

Figure 5