Haier HWM80-27S user manual Midway spinning

Page 13

Midway spinning

1.Put the laundries into the spin tub evenly and smoothly.

2.Spin

(1)Put the gland in properly.

Please put in the gland properly even if the laundries quantity is small.

Push Gland

Push

Proper The laundries Proper No gland are slanting

(2) Close the inner and outer cover of the spin tub.

Outer cover of The spin tub

Inner cover of The spin tub

(3) Spin for 1-2 minutes.

3.Run the foam-removing spinning.

(1) Open the outer cover of the spin tub.

(2) Set the water-filling selector control

WASH SPIN

rod at the "SPIN" side. Fill water for about 1 minute.

If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling.

(3) Close the outer cover of the spin tub. Spin for 1-2 minutes.

11

Image 13
Contents Twin-tub Washing Machine Contents Names of the parts Meaning and description of the symbolsSafety precautions Petrol Installation and adjustment Page Usage of the drain hose Installation and adjustmentHow to change the direction of the drain hoses Pay attention to followings before washing the laundries Preparation before washingUsage of the detergent Musts in washingWashing sequence Midway spinning Rinsing Spinning Disposal after washing Cleaning the lint filterCleaning the overflow filter Trouble-shooting Answer to question Phenomena Reason Packing list Specification